Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Build Threads (https://www.miataturbo.net/build-threads-57/)
-   -   My Turbo NB Daily Driver (https://www.miataturbo.net/build-threads-57/my-turbo-nb-daily-driver-45006/)

RotorNutFD3S 04-05-2010 12:21 AM

Friday Wonton Sean and I drove up to Panic Motorsports in SC to get the parts I needed to start my interior swap. Steve is a great guy to do business with and the drive was well worth it.

This is what we saw when we pulled up, so we knew we made it to the right place:

http://farm5.static.flickr.com/4002/...4b436710_b.jpg

To the project at hand, I wasn't satisfied with the tan interior and I don't enjoy leather in a convertible. I'm also not a big fan of chrome and wood accents on the interior. I already had black floormats and center console, so things were looking a little mismatched. Here's the before pictures:

http://farm5.static.flickr.com/4056/...3906b4bf_b.jpg

http://farm5.static.flickr.com/4066/...cb5d137a_b.jpg

http://farm5.static.flickr.com/4032/...8e423557_b.jpg

Today I picked up a set of MSM door panels to complete the swap, there's some modification required for the interior release handles and door locks, but nothing too hard to do. Here's the results:

http://farm3.static.flickr.com/2683/...784a002e_b.jpg

http://farm5.static.flickr.com/4059/...0f54563f_b.jpg

http://farm5.static.flickr.com/4003/...3212e70c_b.jpg

Notice in the before pictures you can see that there was a wood piece adhered to the OEM shifter surround. When I took that off there was hardened residue from the adhesive that wouldn't come off, even with a razor. So I sanded it smooth and wrapped it with some Neffy Wrap:

http://farm3.static.flickr.com/2775/...ec23b646_b.jpg

I also got the windows tinted (38 on the sides and 18 on the rear glass, nothing extreme) and installed my CF mirrors week before last:

http://farm5.static.flickr.com/4059/...a5b0409a_b.jpg

Figure for now I'll get an MSM pedal set, a Momo steering wheel, and the M2 HCHTDD roll bar I want (to replace the Brainstorm Solo I that's currently installed) and then start saving for the LS swap.

leatherface24 04-05-2010 10:36 AM

Nice choice of all black...youll never go back

Turbo_4 04-05-2010 04:19 PM

Have you thought about rapping the hvac with that fake carbon fiber?

hustler 04-05-2010 04:56 PM

Those bumpers are grotesque.

scandmx5 04-05-2010 06:16 PM

nice job Rip, I've yet to see the all black interior!
loving the NB

JBalla1036 04-05-2010 07:49 PM

Dam very very clean good work

RotorNutFD3S 04-05-2010 11:50 PM


Originally Posted by leatherface24 (Post 550677)
Nice choice of all black...youll never go back

lol Jared, go work on your car!


Originally Posted by Turbo_4 (Post 550898)
Have you thought about rapping the hvac with that fake carbon fiber?

Yeah, for about 1 second. lol I really didn't want to go overboard with the stuff and most people haven't even noticed it until it was pointed out.


Originally Posted by hustler (Post 550939)
Those bumpers are grotesque.

They're not for everyone it seems. I'm rocking it because it came with the car and I like it. I've actually been considering moving to the OEM 01+ bumper with an MSM lip and 01+ headlights, but that idea is secondary to the LS swap.


Originally Posted by scandmx5 (Post 550970)
nice job Rip, I've yet to see the all black interior!
loving the NB

Thanks! That's because it just got installed over the weekend. lol


Originally Posted by JBalla1036 (Post 551017)
Dam very very clean good work

Thanks!

WonTon 04-05-2010 11:54 PM

man! that was a fun swap! i never want to pull a dash again......

RotorNutFD3S 04-05-2010 11:55 PM

Then pray that you never have a heater core issue. ;) Oh, it all has to come back out when the swap begins, the transmission tunnel has to be widened.

WonTon 04-05-2010 11:59 PM

DAMNIT! you serious? well at least we will know what we are doing this time around, and wont have to re wire the dash....

leatherface24 04-06-2010 09:11 AM


Originally Posted by RotorNutFD3S (Post 551152)
They're not for everyone it seems. I'm rocking it because it came with the car and I like it. I've actually been considering moving to the OEM 01+ bumper with an MSM lip and 01+ headlights, but that idea is secondary to the LS swap.

Ill have no use for my front bumper so its yours when it comes off

RotorNutFD3S 04-06-2010 09:20 AM

Awesome! I can work with that. Want your headlights? lol

Doppelgänger 04-06-2010 11:01 AM


Originally Posted by RotorNutFD3S (Post 551157)
Then pray that you never have a heater core issue. ;) Oh, it all has to come back out when the swap begins, the transmission tunnel has to be widened.


Heater core replacement does not require removal of the dash ;)

RotorNutFD3S 04-06-2010 01:28 PM

True enough if you cut the attached hardpipe during replacement.

RotorNutFD3S 04-15-2010 08:53 AM

Just some quick pics to show off the the mirrors and recent window tinting against the rest of the car. I installed my old Revlight and a recently acquired ScanGauge II, which is actually a neat little tool. I unexpectedly received a set of larger brakes so those will be going on ASAP.

http://farm5.static.flickr.com/4067/...4a05ff11_b.jpg

http://farm5.static.flickr.com/4028/...a101d67f_b.jpg

http://farm3.static.flickr.com/2799/...5d5ecf0c_b.jpg

http://farm3.static.flickr.com/2719/...1c117254_b.jpg

Fireindc 04-15-2010 07:30 PM

Super clean! However, needs moar boost!

RotorNutFD3S 04-15-2010 08:04 PM

Or 4 more cylinders. ;) Which is what I'm planning on as long as I don't go buy a local FD. lol

Fireindc 04-15-2010 08:11 PM

Mmmmmmm lsx ftw.

Although lsx in an fd is my dream car.

hingstonwm 04-15-2010 08:12 PM

Nice choice to go with the all black interior. Looks worlds better in my opinion.

Sam Amporful 04-18-2010 11:48 PM

Im mad that im just now seeing this! Congrats dude, I need to meet up with you guys soon. Maybe summertime


All times are GMT -4. The time now is 09:48 AM.


© 2024 MH Sub I, LLC dba Internet Brands