The ReallyRotten MSM Build
16 Attachment(s)
Since I will be doing quite a bit of work on the MSM this summer I figured I'd get a build thread going. I'll start off by listing what has been done so far.
Step # 1: Bought a stock 04 MSM. https://www.miataturbo.net/attachmen...ine=1366210456 https://www.miataturbo.net/attachmen...ine=1366210456 Step # 2: Insert larger intercooler https://www.miataturbo.net/attachmen...ine=1366210456 Step # 3: Boost Gauge Step # 4: 2.5 Turbo Back Exhaust (side pipe out of drivers side)... Photos to come. Step # 5: Insert Roll Bar (M2) https://www.miataturbo.net/attachmen...ine=1366210456 https://www.miataturbo.net/attachmen...ine=1366210456 Step # 6: 225/45ZR-15 Toyo Proxies on TRMotorsport C1 Wheels. Tien Lowering Springs. https://www.miataturbo.net/attachmen...ine=1366210456 https://www.miataturbo.net/attachmen...ine=1366210456 Step #7: Minor detailing (tints, debadging, black seats) more to come this spring. Weather needs to be warmer. http://https://sphotos-b.xx.fbcdn.ne...13481075_n.jpg https://www.miataturbo.net/attachmen...ine=1366210456 What to look forward to: This summer I will be installing a MS ECU with new fuel injectors, fuel pump (Walbro 255LPH High Pressure), and wideband O2 sensor (DM6 Gauge & SM AFR2 Sensor Kit). NEXT year I hope to upgrade the turbo and install some Xida shocks. |
Tial Q BOV on order as of today :) Getting everything ordered for when the MS arrives to do it all in one shot.
|
Subscribing. You have some serious intentions with this car.
|
Woot. Subbed.
|
Please don't black out essential pieces of lighting....
|
Originally Posted by viperormiata
(Post 1012754)
Please don't black out essential pieces of lighting....
|
Originally Posted by ReallyRottenTurbo
(Post 1012764)
They are not blacked out. They are fully visible. Thanks for the concern....
|
Originally Posted by viperormiata
(Post 1012754)
Please don't black out essential pieces of lighting....
so I will not. |
Originally Posted by Hump
(Post 1012816)
Lol, dont be retarded. Of course it dramatically cuts down on light output- everyone knows this.
|
she likes it from behind by a big ass bus
|
Originally Posted by 18psi
(Post 1012835)
she likes it from behind by a big ass bus
|
Originally Posted by ReallyRottenTurbo
(Post 1012949)
That's why I married my husband. He has a big bus and knows how to use it.
|
Originally Posted by ReallyRottenTurbo
(Post 1012949)
That's why I married my husband. He has a big bus and knows how to use it.
Originally Posted by ReallyRottenTurbo
(Post 1012950)
And where to use it..
What I do not know at this point in time is: If the general membership of this forum is "gay" because they drive miatas, what's that make you? |
Originally Posted by y8s
(Post 1013041)
You talk like you might stick around more than two weeks. That doesn't happen with the ladies on this forum much. The 18psi types run them off pretty much right away.
What I do not know at this point in time is: If the general membership of this forum is "gay" because they drive miatas, what's that make you? |
Originally Posted by ReallyRottenTurbo
(Post 1012949)
That's why I married my husband. He has a big bus and knows how to use it.
Originally Posted by ReallyRottenTurbo
(Post 1012950)
And where to use it..
He might like it and (hopefully) much cleaner.
Originally Posted by ReallyRottenTurbo
(Post 1013046)
There's nothing wrong with a girl like likes boobs too.
Originally Posted by y8s
(Post 1013041)
You talk like you might stick around more than two weeks. That doesn't happen with the ladies on this forum much. The 18psi types run them off pretty much right away.
|
The ECU came in today! We have all the parts waiting for our week off. Should be installing the week of July 21st, after our wedding. Nothing says "honeymoon" like tuning the MSM.
|
the closest thing to cars I had on my honeymoon was Michelin rated restaurants.
|
5 Attachment(s)
charge piping, pump/ injectors done, now to modifiy the roll bar so we can run harrness through it, since we now have some Bride low max seats and hook up the megaquirt PNP.. tune it and beat on it ! well forgot i need to built a crank case breather box.. as well and re-route the lines
https://www.miataturbo.net/attachmen...ine=1397583575 https://www.miataturbo.net/attachmen...ine=1397583575 https://www.miataturbo.net/attachmen...ine=1397583575 https://www.miataturbo.net/attachmen...ine=1397583575 https://www.miataturbo.net/attachmen...ine=1397583575 |
3 Attachment(s)
Small update, but a big one! engine, ECu/ wiring done! harnesses and seats fully installed... ready for the road just need to do some street tuning and than its off to the dyno!! so close if the weather would stop raining here we would be golden.
so Crank Case Vent set up built , egr Deleted and removed. all the Evap Junk Gone! Nonsense and no emmissions in MI. we are hopeing for 250 + HP at the wheels on stock turbo with some higher boost levels.. we have the fuel system to support well over 400 HP just going to be chocked out by the stock turbo for now.... Blahh https://www.miataturbo.net/attachmen...ine=1400249363 https://www.miataturbo.net/attachmen...ine=1400249363 https://www.miataturbo.net/attachmen...ine=1400249363 more exterior photos will follow once weather clears! |
Jesus Christ, what is that thing? Your breather line?? Zip tie it to the shock tower brace or something! My eyes!
It looks really tight too. I'd be slightly worried you'd snap that 180* fitting with a little rocking. |
All times are GMT -4. The time now is 01:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands