Lol its faster 60-120 than it was 0-60 when it was stock.

Soviet,
Where do I got digging to find out more about this - I heard somewhere else it's 36-2 from FM that works and now I'm all confused. :-)

:drool:


....


:drool:

Brb taking out a business loan for an EFR turbo, long tube headers and everything v-band. Also injectors. And fuel pump. And AFPR. And a new clutch. And new underwear.

Damn that makes my car feel slow now.

That's all the cheap stuff Jeff. Once you buy all that, then you're looking at paying twice that for a transmission that will hold the power.

Doesn't Soviet still have a 6 speed or did I miss his upgrade?

.
.
.
.
Holy flying fuck quaife transmissions are expensive. Like. Sell one of my testicles expensive. Guess I know where my power goals end.

6 speed past 400 is just as risky as 5 speed past 250.

People try to act cool and post up that they want 450+ but when someone actually gets there, like soviet, they quickly realize why there's a billion sub300 miata's and only a few dozen with more

but boy oh boy did that speedo/tach sweep vid give me a chubby. hnggg

Soviet made this perfect graphic which explains:

https://www.miataturbo.net/attachmen...t-untitled-png

If you think the quaife gearbox is bad, there's the NISMO gearset for the 6-speed which runs around $3200 and the PAR gearset which is $4800.

:laugh: still just as funny

........and shockingly true

Everything said above is true.

Currently life is in the way but if I had extra money and time I'd be rocking a g-force T5 transmission.

Just hold out for Emilio's dog box if it ever pans out. Is that video with your current 29psi e85? :P

Occasionally driving the car and tuning a little bit more. It runs good although right now I'm just on wastegate boost (which is still good for like 350whp)

Finally happy with the idle and fan control

I love your coolant reroute for the heater core. Mind clueing me in on what lines those are?

Sounds really really solid. Are you using the Small Pulsewidth Injector data from ID or are you only using the standard deadtime table? I think using the Small pulsewidth table is causing me some issues with my ID's and full boost.

350 is insanity for just wastegate.

I didn't know ID had data for megasquirt. Interesting...
I have no idea what my injector setting are, tbh.

For heater core, I welded an AN bung to the water neck (the one on the pump) and flipped it 180*.

Loving the vids. I have to post more vids with 24PSI in my thread.

That is not a bad idea.... That o-ring cost me a motor once.

Yeah - ID has numbers, I was the one who got them to do it, and I don't think they are QUITE right. A couple caveats: if you don't have a manifold referenced regulator, MS doesn't deal with it correctly (unless you have the latest firmware AND tell it to) - I just switched and it's better.

https://docs.google.com/spreadsheet/...Hc&usp=sharing

This is all a work in progress, but I have ID's numbers as well as my own (all based on ID data).

Small Pulse Widths shouldn't effect boost at all, it only comes into play with sub 2ms PW.

On there you should find everything you need to get voltage and flow rate compensation set up. I'll try to clean it up more when it's done. If you don't have references regulator, check it out near the bottom of fuel settings menu.

I'll have to take a look. The reason why I ask is at full boost I get stuttering and a complete lack of power once it starts until I back off. It isn't spark plug blow out it isn't over boost either. Only happened once I installed the ID's

What's your duty cycle? It sure doesn't sound like an injector problem,a nd ID's are some of the fastest. What AFR's? I'd take your logs to the MS forums and see what they say.

Off the top of my head 40-50s % AFR is fine until I hit that and when I lift throttle it goes full rich after I lift. Not during. Afrs are fine while in boost. Boost doesn't oscillate either but I do get a lot of tpsdot oscillation. Logs are a bit mystifying. I need to get a solid log of it. I did just increase fuel rail pressure to 58 (I Hector dead times changed to reflect it too. I'm slowly putting it together just irritating to not have a clear reason as to why.

Sorry to thread jack Soviet.

Any chance you have it set up for low ohm?