Here's the cheater bend vald, suck on my 3.5" diameter pipe.
https://cimg0.ibsrv.net/gimg/www.mia...0911cb5f45.jpg Then I noticed this. What the hell Hawk? Is this what you road race guys mean when you say pad transfer layer? Both sides of the car did this. https://cimg8.ibsrv.net/gimg/www.mia...ab788e9b59.jpg Here are the diff mounts on the subframe. I really REALLY dont want the welds to tear out since the force the pinion wants to move is up that means if it rips out its putting a hole in the gas tank. https://cimg2.ibsrv.net/gimg/www.mia...424c707f01.jpg https://cimg5.ibsrv.net/gimg/www.mia...30117ba728.jpg And the diff side, it weighs almost as much as the whole PPF, mazda had the right idea when saving weight I guess. On the other hand, its down low weight and I'm going to need ballast anyways. https://cimg7.ibsrv.net/gimg/www.mia...dca2c76a22.jpg https://cimg9.ibsrv.net/gimg/www.mia...c8c6840978.jpg This is all I had, I get proper hardware monday. https://cimg8.ibsrv.net/gimg/www.mia...f6117024b0.jpg Never. Fucking. Fails. If I fucking paint something I ALWAYS have to make a field revision. https://cimg6.ibsrv.net/gimg/www.mia...aa95c7d6ef.jpg Made the transmission mount moar schookum. https://cimg9.ibsrv.net/gimg/www.mia...d1b6b6b750.jpg Pro tip, this is how you hold up the brake line so it doesnt drain when you drop the rear sub frame. The real pro tip is to have some real fucking inverted flare caps because fuck a whole bunch of getting the rearmost hardline holder upper back in the car. Was literally 2 minutes from wanting to roll the car out of the garage and torch it. https://cimg6.ibsrv.net/gimg/www.mia...7ab1dc8f42.jpg And the shifter boot, cant forget that... I ordered some TPU filament for the printer so I can make something less shitty soon. https://cimg7.ibsrv.net/gimg/www.mia...d06869b1aa.jpg Pictures of the printed turbo inlet for partially my reference. I want to make a new one thats a little more rigid and flows a bit better. https://cimg0.ibsrv.net/gimg/www.mia...e674b42d26.jpg https://cimg1.ibsrv.net/gimg/www.mia...586ac05715.jpg https://cimg4.ibsrv.net/gimg/www.mia...671ebb8cc2.jpg And I test drove it. However much power its got right now is way too much for old ass RS3s in 2nd gear, just blows em right off. |
Originally Posted by Leafy
(Post 1475014)
Here's the cheater bend vald, suck on my 3.5" diameter pipe.
https://cimg0.ibsrv.net/gimg/www.mia...0911cb5f45.jpg |
Wow, that is terribad.
|
Drove it at the test and tune saturday. Getting it on the trailer that morning in the snow was hard... It hits wastegate pressure by 2600rpms and I made all the small gears in the torsen smaller the first time I tried to actually launch it.
Also, this fell out when changing to the race tires. I need to figure out how to buy one or just a while bearing. Xida Torrington bearing race for those wondering. https://cimg8.ibsrv.net/gimg/www.mia...46f8c7707e.jpg |
Shame it broke. Glad I got to ride in it before it did. Now fix it in time for the next event.
|
It's for sale. First 15k takes it all hoosiers and big wheels and whatever spares you want.
|
wut?! :gtfo:
|
Yeah. What he said.
I need an SSM buddy this year. |
Originally Posted by navalhawkeye
(Post 1477399)
I need an SSM buddy this year.
|
None of it seems worth it to just drive for 6 minutes. It's just not fun enough to wake up at 4am.
|
Took you this long to realize that?!?!?!
|
Or is it because aidan's exhaust comment? In all honesty I quit autocrossing when I started tracking for the same reason. That said, I have never denied just how challenging autocross is. You have to be good to get it right in three runs of just seconds. I think the reality is you need another race CAR for the track.
|
Solo is one of those things you get....or you don't and to race at the level you are wanting to race at, you have to "get it."
It's a tremendous amount of commitment, work, money and just effort in general. And if you need to justify it in terms of "Seat time" then it's not the sport for you. The people who look down their nose at Solo have never done it right or they have never done it in the right car. I have competed at high levels of multiple forms of motorsport. Some with more seat time, some with less. I have NEVER gotten out of any other car with the "shakes" like my autocross car gives me every time I drive it. I hate to see you go, I hope you reconsider but if you do go I hope the car ends up in the hands of someone who want's to campaign it Nationally....it's a very capable car and with just a little more time and refinement, could be VERY fast. |
I used to get it. I'm not sure why I dont any more. I think I just got burnt out having to go to literally every event real car working or not. ES was definitely not fun, I could win the local class on my second run, top 10% of pax, in totally not the right car, and just go, welp I'm satisfied with that being as fast as the car can go, wish I could go home. Even getting to run an STR ND, run right with the fast guys out of the gate, but it just wasnt doing it for me. Not for using my day from 4am till 8pm.
|
I hope you can get out of truck duties. I know you said you'd do it this year, but it's not worth losing you long term just for you to stick it out.
|
I did get some motivation to work on it monday. If only to be able to get it out of the garage. Here are carnage pics.
https://cimg1.ibsrv.net/gimg/www.mia...3b911240f6.jpg https://cimg3.ibsrv.net/gimg/www.mia...688b5e88b2.jpg https://cimg4.ibsrv.net/gimg/www.mia...484bc14cc9.jpg https://cimg6.ibsrv.net/gimg/www.mia...8eaa27f013.jpg https://cimg9.ibsrv.net/gimg/www.mia...bd89a5aad4.jpg https://cimg6.ibsrv.net/gimg/www.mia...a75a7f4720.jpg https://cimg0.ibsrv.net/gimg/www.mia...c9d3f0e662.jpg https://cimg1.ibsrv.net/gimg/www.mia...f693f0c608.jpg https://cimg2.ibsrv.net/gimg/www.mia...1f858ce8b8.jpg Ready for drifitng. https://cimg5.ibsrv.net/gimg/www.mia...e6d5a069ae.jpg Damn unproperly hung doors. https://cimg2.ibsrv.net/gimg/www.mia...00b40bc729.jpg |
I loved the zero context butthurt on the facebook post with that diff.
|
Oh that diff is made from the parts of 2 broken diffs, because of how the T1 works you need all the small gears to exist in order to center the output splines. It's going to be fine.
|
all your welds are already cracked.
waiting for the next round of carnage photos. |
It'll be fine. I can't figure why it cracked though, I used 308 rod and the thing spent hours in the is sonic
|
All times are GMT -4. The time now is 12:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands