|
$7 boost leak tester
1 Attachment(s)
Home depot:
Charlotte Pipe 2 in. PVC Sch. 40 Plug-PVC 02118 1800HD - The Home Depot + Fernco 2 in. x 2 in. DWV Flexible PVC Coupling-P1056-22 - The Home Depot + a metal screw in tire valve, possibly for free from a local tire shop = Attachment 234404 Seems to hold enough pressure to work decent. I was putting in about 17psi when I was tracking down some leaks. The clamps held tight but the rubber was swelling a little. Would probably not recommend for 25+psi obviously, but for what I needed it worked great. Andy |
1 Attachment(s)
Yours seems a little better, here is mine.
https://www.miataturbo.net/attachmen...ine=1422661639 I just JB welded the valve on(i've used JB weld to past 100psi). The upper part didn't have a clamp on it in this picture, but it got one. Used this tester to about 35psi. Cheap shitty auto parts store silicone swelled like a balloon. |
lol nice n sloppy but it works right! the rubber valve would work great if it would snap in, that's why I just used a metal screw in type.
|
| All times are GMT -4. The time now is 03:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands