1.8 injectors...on a 1.6
 

everyone keeps saying 1.8 injectors, I've looked: but can I use the injectors from any 1.8 motor or does it have to be from a NA to be direct plug and play.. (like a set from the 2000 thats for sale on miata.net?)

the cars a 90. :)

they are all the same clips I believe, not sure on the CCs.

ok, just wanted to make sure.

All years will work, but they look and flow different. The 94-97 1.8 injectors look like the 1.6 injectors with a different color plastic. The 99+ 1.8 injectors are red plastic and look considerably different. I saw an old post where someone had flow tested stock injectors from different years and the 99+ injectors (which are often noted to have more "headroom" for FI) actually flowed a little less than the 94-97 injectors, but the two setups also run different fuel rail pressures as the 99+ went to the returnless system and IIRC runs base fuel pressures in the 60s vs. the 40s for the early years.

I found the flow test thread here: http://forum.miata.net/vb/showthread.php?t=153952

ah...thanks man. So you think it would be a good idea to grab the 2000 injectors?

<Shameless plug>

I've got a set of 1.8 from a 97 forsale in the classifieds:

https://www.miataturbo.net/forums/showthread.php?t=4752

Also have Bipes, FM O2 clamp and MSD fuel pump forsale as well.

Jay


</Shameless Plug>

lol, I just emailed the guy about his, if this falls through I'll go with yours :)

Interested in a Bipes or Aux fuel pump? :)