NExOBLIVISCARIS

Hey guys, about to pull the trigger on a efr 6258 and was looking at their options and noticed they do a 90 degree outlet housing but noticed no one runs one in their builds, i was wondering if there was a reason why besides it costs extra and is another step?

curly

iTrader: (25)

Just not needed. The standard housing can point down for AC/PS, or out towards the shock tower brace to go behind the headlight.

Lokiel

I'm planning to use one of these in my car (if I ever get time to do it) due to limitations imposed by my re-routed A/C lines and drying cannister (RHD problem).
Currently I have a 270% Si elbow to the intercooler which I hate so the 90* outlet will mean I can use a less extreme Si elbow:


Whether or not you choose to use it depends on what options are available to you and what restrictions you have.

The other option I MAY have is to redo the A/C lines and move the cannister somewhere else (trying to clock the turbo down currently causes the BOV to hit the cannister).

Downmented

iTrader: (1)

It really just depends on how you plan to route your intercooler piping. I personally run one, but I also took my piping over top of the radiator instead of down and around.

wombat57

nice looking engine bay!

wombat

NExOBLIVISCARIS

Well it looks like I didn't search hard enough. For the piping I'm replacing the 90 degree outlet I feel is going to work out best. Just wanted to make sure there wasn't an obscure reason they aren't common