I believe that zoom3 is very similar to the voodoo II of flyinmiata.com
|
Originally Posted by Marc@M-Tuned.com
(Post 295459)
Get an MS1 with a Bloomslang Harness from CJernigan, add an M1 CAS and you will be up and running in about 3 hours max!! That is what I did.
I have that setup on my 99 and it works well. MS controls fuel and spark, stock ECU controls everything else. I drive my car to work everyday with no problems. Logging and tuning is necessary but that is part of the fun. I have seen some talk here and there about 'issues' with parallel setups but I have not seen any myself :dunno: |
then you are the person to talk to, lol, have you dyno it yet?
|
Originally Posted by ZX-Tex
(Post 295657)
+1
I have seen some talk here and there about 'issues' with parallel setups but I have not seen any myself :dunno: Chad... You have some customers here for atleast your special harness, if not a full setup! |
Originally Posted by etnad
(Post 295661)
then you are the person to talk to, lol, have you dyno it yet?
I just installed it,, the CAS, the sensors, the injectors, and tuned it. No dyno yet, not needed really with the WBO2 and some careful trial-and-error on the spark map (based on some posted here). When I do take it to a dyno it should just need some tweaking, not a major tune. |
so "chad" is the man to talk to about these custom ms?
|
ok Chad, Im all ears, I mean eyes. So MSI stand alone. let me know what i need to buy, can i keep AC unit? I am installing t3 with 550 injectors, planning on eliminating "Airflow meter or Whaqtever you guys call it" but if I have to keep it its all good, no biggie. I am ready to order stuff, i just one to order the right stuff.
thanks |
I have a boomslang harness...I want to run MS in parallel, but I was thinking MS II with PCB 3.0. Now I see using am MS I? WTF? Can I use MS I with my stock sensors and just modify my timing wheel?
|
Where is Chad? How can I find CHad here? Im ready to buy some stuffm the right stuff!
|
Cjernigan is his user name. Not sure if he is building MS units currently, but he can probably help you with a harness.
|
I was all set to buy MS from Chad a couple of months ago, but he told me that he was too busy to build any so he wasn't taking orders. That is why I have been looking elsewhere.
|
Originally Posted by Stein
(Post 296105)
I was all set to buy MS from Chad a couple of months ago, but he told me that he was too busy to build any so he wasn't taking orders. That is why I have been looking elsewhere.
|
Originally Posted by Stein
(Post 296105)
I was all set to buy MS from Chad a couple of months ago, but he told me that he was too busy to build any so he wasn't taking orders.
|
Originally Posted by etnad
(Post 295777)
ok Chad, Im all ears, I mean eyes. So MSI stand alone. let me know what i need to buy, can i keep AC unit? I am installing t3 with 550 injectors, planning on eliminating "Airflow meter or Whaqtever you guys call it" but if I have to keep it its all good, no biggie. I am ready to order stuff, i just one to order the right stuff.
thanks |
Originally Posted by etnad
(Post 295636)
I believe that zoom3 is very similar to the voodoo II of flyinmiata.com
Stephanie |
All times are GMT -4. The time now is 06:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands