Absurdflow Low Mount (A/C P/S friendly)
#1
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,898
Total Cats: 399
Absurdflow Low Mount (A/C P/S friendly)
Horray for something cool, and a new website. Absurdflow
I'm taking suggestions on that one.
BEGI coolant reroute/bypass/whatever-they-call-it is going to be used to get rid of that OEM lower radiator hose and make room for the compressor.
So far it looks like a very nice setup, so much so that I am seriously considering ditching the twins and redoing it for my own car. Or at least reusing the downpipe for a sequential TT.
I hope I don't jinx myself cause this is the first thread I've made when I'm not actually done with the build before posting...
Anyone want a (parallel) twin turbo setup for their 1.8, dynoed to 270rwhp @12psi on a stock '94 1.8? I'll entertain offers.
I'm taking suggestions on that one.
BEGI coolant reroute/bypass/whatever-they-call-it is going to be used to get rid of that OEM lower radiator hose and make room for the compressor.
So far it looks like a very nice setup, so much so that I am seriously considering ditching the twins and redoing it for my own car. Or at least reusing the downpipe for a sequential TT.
I hope I don't jinx myself cause this is the first thread I've made when I'm not actually done with the build before posting...
Anyone want a (parallel) twin turbo setup for their 1.8, dynoed to 270rwhp @12psi on a stock '94 1.8? I'll entertain offers.
#9
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
That is so **** mcgee. AC and PS you say?
I bet you could get a simple 90 radiator hose fitting and just move the hose outta the way without going to a full replumbing of the lower hose.
I bet you could get a simple 90 radiator hose fitting and just move the hose outta the way without going to a full replumbing of the lower hose.
#10
OMG do want!! Someone get him a 1.6 to to make one on.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#18
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,898
Total Cats: 399
If you want a TT buy mine for $2500.
#19
I'm pretty sure you could take a standard Miata lower radiator hose, cut and splice it in the middle (like Begi does anyway) and get to the standard Miata lower radiator point from there. Total cost is about $10, not counting the hose. I have a Volvo radiator, so I had to go across the front of the engine to the pass. side.
I'm digging your manifold. Already pointed Dr. Turbo to this thread and told him to give you money.