bandit mx5

Ok i am trying to get my car back in the game after a couple years and a different setup. just looking at parts and trying to figure whats going to work. i have a Greddy manifold that is cast iron and durable, i have cracks in my cheap manifold currently a TD05 Big 16g my greddy with relief cuts and all can i get a flange adapter to make this Greddy manifold to work with my TD05??

Octane

I would think you'd be looking for something like this..
TD05 to T3 Flange Adapter 4g63 16g 20g T3 T4 T04E GT35 T3 T0 TD05 Turbo Manifold | eBay

I'm in a similar situation with mounting my td04hl-15g to a t3 manifold flange and going to be using a similar adaptor or just buying the proper flange and chopping up/welding it to the mani. Good luck!

bandit mx5

Thank you for the info. no one either wanted to comment or felt like they knew. i thought thats what i needed but wanted to see if anyone was in the situation or had good advice. i was looking at doing a T3 flange adapter and was looking at the Taco Taco Mani. they are on back order for two months as they are being manufactured in bulk. i believe this Mani is the same design..fixing to look at specs

Octane

No problem. I'm in a pretty similar situation (minus being out of a previous manifold due to cracking) so figured I could help out in some way. Coincidentally, I just purchased a Taco Taco manifold used through someone, should be getting it tomorrow pretty excited to check it out!