Notices
DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Check out this intercooler

Thread Tools
 
Search this Thread
 
Old Feb 24, 2007 | 10:39 AM
  #1  
sickmiata09's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2007
Posts: 136
Total Cats: 0
From: Philadelphia, Pa
Default Check out this intercooler

Hey guys do you think this intercooler will be effecient in order to cool my 99. I was wondering how well it would cool because at first I will run about 9-10 psi, but then I would like to up it. let me know your thoughts. Thanks.

Here is the link : http://cgi.ebay.com/ebaymotors/ws/eB...5384549&rd=1,1
Old Feb 24, 2007 | 10:41 AM
  #2  
F20turbo's Avatar
Senior Member
 
Joined: Jan 2005
Posts: 737
Total Cats: 0
Default

it would be fine for up to 400whp probably.
Old Feb 24, 2007 | 10:42 AM
  #3  
sickmiata09's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2007
Posts: 136
Total Cats: 0
From: Philadelphia, Pa
Default

Please tell me thats not a joke, and that u actually looked at the intercooler. I mean its not that big ru sure? But if you say so I believe u.
Old Feb 24, 2007 | 10:44 AM
  #4  
F20turbo's Avatar
Senior Member
 
Joined: Jan 2005
Posts: 737
Total Cats: 0
Default

Its big enough, you cant really go much longer or it wont fit in the mouth of the miata. Just take my word for it.
Old Feb 24, 2007 | 10:45 AM
  #5  
sickmiata09's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2007
Posts: 136
Total Cats: 0
From: Philadelphia, Pa
Default

k thanx
Old Feb 25, 2007 | 12:13 AM
  #6  
akaryrye's Avatar
Elite Member
iTrader: (5)
 
Joined: Jul 2006
Posts: 2,557
Total Cats: 5
From: Central California
Default

also you may want to think about what size of intercooler piping you want to run. 3" is really overkill, and I recall studies being done by BEGi or someone else showing that 300hp and below really saw no benefit from going larger than like 1.75" diameter piping. In fact, going too big can actually hurt your turbo's response time. Personally Id look for something with 2" inlet and outlet, like this:

http://cgi.ebay.com/ebaymotors/Unive...QQcmdZViewItem
Old Feb 25, 2007 | 01:36 AM
  #7  
samnavy's Avatar
Elite Member
iTrader: (7)
 
Joined: Apr 2006
Posts: 6,463
Total Cats: 327
From: VaBch, VA
Default

Andy and Akaryre are correct. That IC will be sufficient for your needs and will handle all the air your TD04h will flow.

The 3" piping is a killer though. The ThrottleBody inlet is 2.5". What size is the compressor outlet on you turbo? You can keep costs down by sticking with the same size piping and couplers. 2.0" piping you will find is much easier to route (I assume your '99 has PS and AC) even compared to 2.5" although both are very doable.

That IC that Ak linked is exactly what I run. My hot side piping is all 2" from the compressor outlet to IC inlet. And on the cold side, it's 2" and I use a 2"-2.5" 90* enlarging coupler at the TB, but that thing was expensive. I wish I'd bought an IC with 2.5" inlet/outlet and then just would have needed a regular 2"-2.5" coupler coming out of the compressor.
Old Feb 25, 2007 | 03:28 AM
  #8  
Kelly's Avatar
Senior Member
iTrader: (6)
 
Joined: Mar 2005
Posts: 1,396
Total Cats: 0
From: Sammamish, Washington
Default

Check out the seller Just Intercoolers on Ebay. Thats where Andy suggested a few months back and they do have nice cores and tons of sizes. I think I'll go buy one right now
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
Sep 30, 2018 01:09 PM
The Gleas
MEGAsquirt
3
Oct 1, 2015 09:30 AM
ihiryu
General Miata Chat
9
Sep 28, 2015 10:22 AM
itsMikey
MSPNP
3
Sep 28, 2015 06:40 AM




All times are GMT -4. The time now is 12:09 AM.