Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)
-   -   china gt3071r? (https://www.miataturbo.net/diy-turbo-discussion-14/china-gt3071r-21252/)

stupid fast 05-20-2008 01:05 AM

china gt3071r?
 
i know most guys hate china crap but what do you guys think of this:

http://cgi.ebay.com/ebaymotors/GT307...9772QQtcZphoto

when will it get full boost? 4500 rpm??

Zabac 05-20-2008 09:34 AM

Just make sure you place a mesh type filter before your IC, ball bearings are really hard to get out of your IC after that turbo grenades itself.
Notice the lines that are going down the middle of both the housings, that=the fails.

Braineack 05-20-2008 09:40 AM

it would be nearly impossible for the bearings to explode and find themselves inside the intake path....the compressor blades on the other hand....

Newbsauce 05-20-2008 09:42 AM

I thought our ultimate verdict was that the chinachargers were acceptable... unless they were the china ball bearing ones?

stupid fast 05-20-2008 10:04 AM

what will be the spool time on this turbo?

Braineack 05-20-2008 10:18 AM

It would be on par with a 2871 or 2876 or so, considering the turbine is the same. However, it's a .86 a/r so somewhere around the 4.5-6K mark for a good amount boost depending on the engine.

Savington 05-20-2008 01:04 PM

I have a friend who has an STI with that same turbo. 2.5 liter 4 cylinder, vs. 1.6 or 1.8 4-cylinder. He doesn't get full boost until after 4000rpm. It's LAGGY. I would never consider a 3076 an acceptable turbo on a Miata unless it's a drag car.

Joe Perez 05-20-2008 01:11 PM

I love how, instead of the manufacturer's name, those guys just stamp the word "TURBOCHARGER" onto the side. Like you couldn't have otherwise figured out what this large, heavy thing with spinning blades inside it was.

HKSturboMiata 05-20-2008 01:19 PM

It even looks like garbage.

91NApeewee 05-20-2008 01:21 PM

Isnt the BB turbo that comes with the Begi S kit like $800 from Begi? Is this turbo drastically different? For the ebay price of 700, I would spend 100 more and get a Garrett from Begi.

jayc72 05-20-2008 01:39 PM


Originally Posted by 91NApeewee (Post 259673)
Isnt the BB turbo that comes with the Begi S kit like $800 from Begi? Is this turbo drastically different? For the ebay price of 700, I would spend 100 more and get a Garrett from Begi.

$800 for which turbo?

You aren't going to get a gt3071R for $800, maybe $1200-1300.

wes65 05-20-2008 01:46 PM

yeah, the gt25 is in the $800 range, i think thats what youre thinking of. Even the gt2860 is closer to 1k

jayc72 05-20-2008 01:50 PM

gt25R is just over $900.

91NApeewee 05-20-2008 02:13 PM

sorry, I was thinking of the GT2554. Last time I talked to them, the said not getting it along with the S kit would knock around 800 off the price.

18psi 05-20-2008 08:55 PM

lol i wouldnt be comfortable buying a turbocharger from a company that misspells like 30% of the listing


All times are GMT -4. The time now is 12:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands