Coolant Fittings Size for TD50H-16g Turbo
#7
Longer turbo life and/or lower oil temps would be the mains. The pain of running all the extra lines was always the rub for me.. It's like.. if this turbo will last 5 years and costs 400 bucks.. is it worth the time and trouble to water cool it? I'm pragmatic and lazy/apathetic.
Heatsoak and Underhood temps might be a bonus too.
Heatsoak and Underhood temps might be a bonus too.
#12
Junior Member
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
My oil drain bolt fitted inside the coolant in/outlet so i believe that M14x1.5
Anyone know where online or around detroit I can buy some fittings now?
I am thinking qty:2 M14x1.5 to a 5/16 bard should be good.
Anyone know where online or around detroit I can buy some fittings now?
I am thinking qty:2 M14x1.5 to a 5/16 bard should be good.
#19
http://www.turbochargers.com/store/p...roducts_id/404
The subaru turbos we use are Mitsu center sections. I can get you a considerably better price on that kit, if you're interested.
The subaru turbos we use are Mitsu center sections. I can get you a considerably better price on that kit, if you're interested.
#20
Junior Member
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
http://www.turbochargers.com/store/p...roducts_id/404
The subaru turbos we use are Mitsu center sections. I can get you a considerably better price on that kit, if you're interested.
The subaru turbos we use are Mitsu center sections. I can get you a considerably better price on that kit, if you're interested.