Damn Dsm Turbo - Miata Turbo Forum - Boost cars, acquire cats.

DIY Turbo Discussion greddy on a 1.8? homebrew kit?
Sponsored by:
Sponsored by:

Damn Dsm Turbo

Old 12-28-2006, 10:24 PM
  #1  
Senior Member
Thread Starter
iTrader: (2)
 
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 999
Total Cats: 0
Default Damn Dsm Turbo

I am about to kick myself in the face for making the decision to use this POS DSM 13g turbo.. I have been racking my brain and searching like mad to find out what size the coolant inlets are, and what im going to use to connect them to the miata cooling system.. I decided i wanted to use the stock coolant lines and banjo bolts, and then connect them to rubber hoses in line with the heater core. well the factory coolant lines are impossible to find, unless i want to spend 50 bucks on new ones.. im about ready to drill them out and tap them to an american size... Can someone please shoot me and put me out of my misery. I knew i should have just baught a damn T4!
adbradley is offline  
Old 12-29-2006, 01:14 AM
  #2  
Senior Member
 
Join Date: Jan 2005
Posts: 737
Total Cats: 0
Default

GT3271 = 650 dollars.....


And it gets you a 400whp capable turbo that spools from 3500-4500rpm ( full boost ).
F20turbo is offline  
Old 12-29-2006, 01:36 AM
  #3  
Elite Member
iTrader: (13)
 
cjernigan's Avatar
 
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,140
Total Cats: 6
Default

Don't forget the $200 Ghettocharger.

You should just run it without coolant. It's not going to hurt it any if you have synthetic oil, get the turbo on, enjoy the car, and source your coolant bits while you enjoy the new turbo. If you're really worried, idle the car for a few seconds when you stop before you shut it off.
cjernigan is offline  
Old 12-29-2006, 09:11 AM
  #4  
:(
iTrader: (7)
 
Join Date: Jul 2006
Location: nowhere
Posts: 8,254
Total Cats: 2
Default

no banjo bolts needed bradley just get some more heater hose of the right size and use a few barb fittings, and a metric to barb adapter comming of the turbo this is how i was gonna do it. So it is realy pretty simple just splice in there the pressure isnt very high 14psi max probably and the flow probably isnt that much either. You do know that you do not have to use the coolant ports right, i ran mine just fine through the summer heat and, no problems. Just a suggestion.
magnamx-5 is offline  
Old 12-29-2006, 09:39 AM
  #5  
Senior Member
Thread Starter
iTrader: (2)
 
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 999
Total Cats: 0
Default

thanx for the advice... I know i dont HAVE to run the coolant, but its there, and id like to have everything including that ready to install when it comes time to install it.
adbradley is offline  
Old 12-29-2006, 09:39 AM
  #6  
Senior Member
Thread Starter
iTrader: (2)
 
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 999
Total Cats: 0
Default

i just need to suck it up and quit being such a big baby
adbradley is offline  
Old 12-29-2006, 01:01 PM
  #7  
Senior Member
 
Join Date: Apr 2005
Location: NAS Oceana/VA
Posts: 759
Total Cats: 0
Default

Dude, it took me like 5 min to run the coolent in my 14b. Why are you having so many problems?
getsidewaysd1 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
63
08-09-2018 07:54 PM
Rick02R
WTB
3
01-03-2016 08:18 PM
tazswing
Race Prep
20
10-03-2015 12:04 PM
cale saurage
DIY Turbo Discussion
16
10-01-2015 12:25 PM


Thread Tools
Search this Thread
Quick Reply: Damn Dsm Turbo


Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.