Notices
DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Dwell Reducer Group Buy

Thread Tools
 
Search this Thread
 
Old Jul 15, 2008 | 11:02 PM
  #1  
TravisR's Avatar
Thread Starter
Elite Member
iTrader: (9)
 
Joined: Jun 2008
Posts: 1,547
Total Cats: 14
From: Houston, TX
Default Dwell Reducer Group Buy

I got some of the boards in,




I don't have any built yet. I have around 45 of these boards. I don't know about price as I haven't paid for them yet, so I don't know what they cost me.

More to come.
Old Jul 16, 2008 | 04:28 PM
  #2  
Fra66L's Avatar
Junior Member
 
Joined: Sep 2007
Posts: 58
Total Cats: 0
From: Brisbane, Australia
Default

Mmmmm...Tidy.

Nice one TravisR. Looking forward to this one..
Old Jul 16, 2008 | 05:27 PM
  #3  
Rafa's Avatar
Elite Member
iTrader: (22)
 
Joined: Dec 2006
Posts: 3,224
Total Cats: 3
From: Sunny Spanish speaking Non US Caribbean
Default

Let me know the price. I'm interested.
Old Jul 16, 2008 | 07:22 PM
  #4  
trito's Avatar
Junior Member
iTrader: (1)
 
Joined: Jun 2005
Posts: 213
Total Cats: 0
From: San Jose
Default

I'm interested as well
Old Jul 16, 2008 | 10:57 PM
  #5  
sn95's Avatar
Junior Member
iTrader: (2)
 
Joined: Oct 2007
Posts: 297
Total Cats: 0
From: Lisle, IL
Default

I'm interested too
Old Jul 18, 2008 | 02:34 PM
  #6  
Underscores's Avatar
Newb
 
Joined: Oct 2007
Posts: 9
Total Cats: 0
From: suwanee, ga
Default

i'm interested also.
Old Jul 18, 2008 | 03:09 PM
  #7  
Underscores's Avatar
Newb
 
Joined: Oct 2007
Posts: 9
Total Cats: 0
From: suwanee, ga
Default

i just had a coil fail on me yesterday while i was on the smog test dyno. the car passed the test...then one coil died while they were testing my gas cap seal. car sounds like a bmw/moto guzzi motorcycle now...

i'm running a '94 link ecu with a homemade harness/plate (no capacitors inline) and toyota 90919-02240 coils.

just thought i'd put this out there...reducing dwell on these toyota coils may be a smart idea.
Old Jul 28, 2008 | 10:46 AM
  #8  
alden77's Avatar
Newb
 
Joined: Aug 2006
Posts: 11
Total Cats: 0
From: Indianapolis, IN
Default

I'm in too, if the price is within reasonable limits.
Alden
Old Jul 28, 2008 | 10:59 AM
  #9  
neogenesis2004's Avatar
Elite Member
iTrader: (12)
 
Joined: Aug 2006
Posts: 4,413
Total Cats: 20
Default

Originally Posted by Underscores
i just had a coil fail on me yesterday while i was on the smog test dyno. the car passed the test...then one coil died while they were testing my gas cap seal. car sounds like a bmw/moto guzzi motorcycle now...

i'm running a '94 link ecu with a homemade harness/plate (no capacitors inline) and toyota 90919-02240 coils.

just thought i'd put this out there...reducing dwell on these toyota coils may be a smart idea.
I must have put 10k miles on mine before on the stock ecu. This was 6 months ago before any talk of caps or reducing circuits. They were running fine when I sold the car, and probably still are.
Old Jul 28, 2008 | 12:45 PM
  #10  
Zaphod's Avatar
Elite Member
 
Joined: Mar 2006
Posts: 1,574
Total Cats: 106
From: Schwarzenberg, Germany
Default

I am also interested, hope to get the COPs running with the EMU.

Let me know the price (and shipping to Germany - I hope you could make this possible).

Thanks
Old Jul 30, 2008 | 03:30 AM
  #11  
Flippy02's Avatar
Junior Member
 
Joined: Nov 2006
Posts: 254
Total Cats: 0
From: Santa Clarita, CA
Default

update?
Old Jul 30, 2008 | 07:33 AM
  #12  
Mimime's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2006
Posts: 523
Total Cats: 0
From: Hong Kong
Default

I am interested, since I am using EMB...my COPS has been sitting around for months.
Old Aug 1, 2008 | 10:47 AM
  #13  
TravisR's Avatar
Thread Starter
Elite Member
iTrader: (9)
 
Joined: Jun 2008
Posts: 1,547
Total Cats: 14
From: Houston, TX
Default

Alright guys, its coming, My target date is the 16th of this month.

T
Old Aug 1, 2008 | 09:14 PM
  #14  
alden77's Avatar
Newb
 
Joined: Aug 2006
Posts: 11
Total Cats: 0
From: Indianapolis, IN
Default

Is that a target date to have the boards ready to ship? If so, do you have a price projection?
Alden
Old Aug 2, 2008 | 01:13 AM
  #15  
TravisR's Avatar
Thread Starter
Elite Member
iTrader: (9)
 
Joined: Jun 2008
Posts: 1,547
Total Cats: 14
From: Houston, TX
Default

That's target date to ship, I know based on what I THINK the cost will be it'll be 10 bucks a board unpopulated and probably 20-25 populated. But don't even quote me on that. I'm not doing the assembly it’s all professionally done by a PCB assembly house, and I don't know what they are charging yet, nor do I even know what the PCB's cost yet. They are really taking their time getting me the invoices.
Old Aug 2, 2008 | 07:51 AM
  #16  
Rafa's Avatar
Elite Member
iTrader: (22)
 
Joined: Dec 2006
Posts: 3,224
Total Cats: 3
From: Sunny Spanish speaking Non US Caribbean
Default

Originally Posted by TravisR
That's target date to ship, I know based on what I THINK the cost will be it'll be 10 bucks a board unpopulated and probably 20-25 populated. But don't even quote me on that. I'm not doing the assembly it’s all professionally done by a PCB assembly house, and I don't know what they are charging yet, nor do I even know what the PCB's cost yet. They are really taking their time getting me the invoices.
Change my status from interested to IN!

Thanks man
Old Aug 18, 2008 | 11:36 PM
  #17  
Flippy02's Avatar
Junior Member
 
Joined: Nov 2006
Posts: 254
Total Cats: 0
From: Santa Clarita, CA
Default

i'm in, let me know when
Old Aug 21, 2008 | 05:49 AM
  #18  
Fra66L's Avatar
Junior Member
 
Joined: Sep 2007
Posts: 58
Total Cats: 0
From: Brisbane, Australia
Default

Any news yet Travis?
Old Aug 21, 2008 | 07:12 AM
  #19  
TravisR's Avatar
Thread Starter
Elite Member
iTrader: (9)
 
Joined: Jun 2008
Posts: 1,547
Total Cats: 14
From: Houston, TX
Default

The boards should be here today or tomorrow, I'll let you guys know when they arrive.
Old Aug 21, 2008 | 10:48 PM
  #20  
wb4pfj's Avatar
Newb
 
Joined: Oct 2007
Posts: 1
Total Cats: 0
Default

Prices sound good. Put me down for one



All times are GMT -4. The time now is 12:12 AM.