Exhintake swap for a future turbo setup
Thread Starter
Junior Member
iTrader: (4)
Joined: Jun 2013
Posts: 148
Total Cats: -3
From: Dallas TX
I just bought an exhaust cam that i plan on installing in my 99 NA. My question is will this be beneficial once i go turbo? Should i change the 197.5 angle to reduce overlap?
Thread Starter
Junior Member
iTrader: (4)
Joined: Jun 2013
Posts: 148
Total Cats: -3
From: Dallas TX
I did the mod today, it feels a little better no a huge difference if any. 2 things that might have impacted the results 1. its the first mod on the car so I still have a very restricted exhaust (99 miata are known for bad stock exhaust system) 2. I did not drill the can I just counted 21 teeth 195.6*. I hope this mod will show much larger results once i go turbo
I didn't feel any difference when I did the mod on my 96 head N/A.
But exhintake + 2.5" exhaust + megasquirt gained me like 9whp (from 94whp to 103whp! WHOA!!!!11lol)
I would do again it if I had a 99-00 cam laying around.
But exhintake + 2.5" exhaust + megasquirt gained me like 9whp (from 94whp to 103whp! WHOA!!!!11lol)
I would do again it if I had a 99-00 cam laying around.
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
Sep 12, 2016 08:17 PM






