(FIXED)1st Issue with China 2860 (video inside)
I'm thinking external waste gate? __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
get a hand mirror.
edit: oh wait the DP is still there... |
Soon as it's cool enough I will remove it. Self employment FTMFW.
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Originally Posted by Braineack
(Post 388826)
get a hand mirror.
edit: oh wait the DP is still there... http://content.ytmnd.com/content/a/f...02722a579e.jpg |
Ill say it again, dump the internal wg and get an external welded onto the manifold and call it a day.
|
are your turbines the same size? can you not fit this new turbo into the old exhaust housing?
|
I just ordered the same turbo last night and already have an EWG that I was planning to use with my other one. I was actually thinking about this all last night cause I couldn't decide if I wanted to use the internal gate or not. I think you just made up my mind for me.
|
Originally Posted by Braineack
(Post 388833)
are your turbines the same size? can you not fit this new turbo into the old exhaust housing?
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
i thought you had a 2854 before... and you should now refer to your turbo as a china 2871.
|
Fixed it. The flapper door was loose in the shaft so it was binding. I put a c clip on the back side. Video up in a few.
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Originally Posted by levnubhin
(Post 388821)
I'm thinking external waste gate? |
Actually Lev, if you want to stay IWG, I'd happy to switch exhaust housing with you if you want to see if that will help.
edit: NM, just saw new post. Glad it was something easy. Did you leave comething off from when you stripped it apart to measure? |
Are you keeping track of time spent and down time? ;)
|
Okay mine is doing the same thing. You said you just put a c-clip on the flapper itself to hold it?
|
Originally Posted by Cpt_Slow
(Post 388850)
Actually Lev, if you want to stay IWG, I'd happy to switch exhaust housing with you if you want to see if that will help.
edit: NM, just saw new post. Glad it was something easy. Did you leave comething off from when you stripped it apart to measure? If my fix dosent hold up then yeah, I really dont want to remove it again. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Originally Posted by Turbo_4
(Post 388853)
Okay mine is doing the same thing. You said you just put a c-clip on the flapper itself to hold it?
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
|
that was easy.
|
1 Attachment(s)
woot woot
|
Before the c clip.
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
All times are GMT -4. The time now is 01:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands