getting there... more progress
http://s96.photobucket.com/albums/l191/o0Quicksilver0o/
thats as far as i am now. everything is done but the downpipe and mid pipe and to fluid her up. well and then handing my car over to the local megasquirt guru. :bigtu: 1/2 a year into the making and i want her running soo bad. driving a stock base model civic everyday is owning me :td: let me know what you think |
whoa, that touches my bad place.
|
lol
|
Hey i saw that rollbar on HMT a while back, looking good.
How'd that manifold come out when you were all done with it? Think it's going to flow nice? I like the reducer going to the compressor, doin it right. |
oh wow, that looks like such a sick lil project car. Have not checked out your album til now.
props. I bet it will scream down the road quite well |
Its ahaaaa a very nice.
|
thx guys, little more info since its only pics. its got all around poly bushings on a stock suspension :( for now. took out about 300 pounds out. Hopeing for 200-220 whp but well see. mainly my track car for auto x/drift events. should be a fun car. but itll be alot more work till i have it complete.
|
Did you build that Roll bar? If so what did you use to bend the tubing?
|
I built my own. Here are some pics before it was powder coated.
http://members.aol.com/sbrian2/bar1.jpg http://members.aol.com/sbrian2/bar2.jpg http://members.aol.com/sbrian2/bar3.jpg I used 1.75" X .120 wall DOM tubing and bender like this: http://www.medfordtools.com/benders/m3b/01.jpg |
very nice! any pics where the main hoop mounts to the chassis?
|
Thats tight dude. You should make em and sell em.
|
Originally Posted by m2cupcar
(Post 72217)
very nice! any pics where the main hoop mounts to the chassis?
|
sbrian, how much do you have invested in your bender? Ive wanted one like that for years, just to cheap to buy it :(
|
I borrowed mine from a friend, but that one is $295 according to their site but that does not include die sets which range from $115-395 per size. :eek5:
|
ones like that range in price from about $275 (for a chinese one) to $650 or so for a cadillac. There is someone on ebay selling decent ones for about $350 that I've used before (school had one) and thought it was sufficient. The bender itself isn't the expensive part... it's the dies. Make sure whichever one you want comes with all the dies you could ever need.
|
looks like i gotta throw it away. the events i will be running at require an already appoved model. so looks like i either pay to have it tested or buy a hard dog. fucking retarded :( so when i found that out i stopped working on it, so there are not mounting plates welded to it or backing plates made for that matter. :sadwavey: haha anyone want a style bar :gay:
oh and if anyone wondered.. the paint job is going to be white with a solid black stripe like my old paint job just different colors. time to fab up a front strut tower/firewall brace and get a lower front tie bar. other than that thats pretty much got the fab work done for it... oh and weld some aluminum to my hood where my headlights used to be. but that will probly wait a while... who needs a body to go throw some smoke. |
Hey what events do you speak of that require an already approved model? I was about to have a bar built by a shop and have postponed that due to hearing that from others as well.
|
Originally Posted by mxv
(Post 72274)
looks like i gotta throw it away. the events i will be running at require an already appoved model. so looks like i either pay to have it tested or buy a hard dog. fucking retarded :( so when i found that out i stopped working on it, so there are not mounting plates welded to it or backing plates made for that matter. :sadwavey: haha anyone want a style bar :gay:
oh and if anyone wondered.. the paint job is going to be white with a solid black stripe like my old paint job just different colors. time to fab up a front strut tower/firewall brace and get a lower front tie bar. other than that thats pretty much got the fab work done for it... oh and weld some aluminum to my hood where my headlights used to be. but that will probly wait a while... who needs a body to go throw some smoke. |
That's just fucking stupid. Who approves rollbars? The SCCA for sure doesn't and I don't think that NASA does either. As long as you build it to spec and it passes tech then you should be good to go.
Who do you run with? |
thanks man, its a 300zx turbo. i "hear" they are a good flowing t25 and still keep a pretty quick spool... but we will see. mid feb ill have a dyno on this thing.
|
All times are GMT -4. The time now is 03:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands