Greddy banjo bolt help - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to   Members

DIY Turbo Discussion greddy on a 1.8? homebrew kit?

LinkBack Thread Tools
Old 11-20-2012, 04:24 PM   #1
Junior Member
Thread Starter
iTrader: (2)
albertogti117's Avatar
Join Date: Jul 2011
Location: Houston, Tx
Posts: 167
Total Cats: 4
Default Greddy banjo bolt help

Hey guys,

Last night I managed to snap the banjo bolt that goes on the oil feed of the Greddy td04

I was able to find a M10x1.25 banjo bolt that was just about the same length as the stock Greddy banjo bolt. However, the holes on the new bolt are slightly smaller than the holes on the stock bolt.

Is this okay to run or should I drill out the holes a little bigger? I have heard that the Greddy oil feed line is a bit larger than it needs to be so perhaps I could get away with running a banjo bolt with smaller holes? I have attached a few pictures showing the difference in diameter of the holes. Also note that the new bolt does not have a recess at the end of it like the Greddy banjo bolt.

Attached Thumbnails
Greddy banjo bolt help-20121120_135941.jpg   Greddy banjo bolt help-20121120_140033.jpg  
albertogti117 is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Another Cast Manifold Corky Bell Prefabbed Turbo Kits 18 11-22-2016 10:01 PM
Need help - Stock Balancer and Fastforward overlay pulleys Frank_and_Beans Supercharger Discussion 13 09-12-2016 09:17 PM
WTB Bellhousing Bolts patsmx5 WTB 1 10-01-2015 10:43 AM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 11:26 AM.