greddy oil feed line? - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Reply
 
 
 
LinkBack Thread Tools
Old 07-21-2006, 05:06 PM   #1
I'm Miserable!
Thread Starter
 
Join Date: Jul 2006
Location: sandiego, CA
Posts: 332
Total Cats: 0
Default greddy oil feed line?

ok can someone give me a picture of were this line goes to? i know one end bolts to the turbo then were on the engine? i got the pics for the return line. i also need to know were i can get what i need to tap for the return. what i meen is the stud that sticks out that the hose goes on i need that . were can i get it?
drftem is offline   Reply With Quote
Old 07-21-2006, 06:08 PM   #2
I'm Miserable!
Thread Starter
 
Join Date: Jul 2006
Location: sandiego, CA
Posts: 332
Total Cats: 0
Default

from what i see there is a spot already on the cr were the oil return hose is supposed to be ran to. can someone tell me were to find this.i think ive figured out were the oil feed line goes...
drftem is offline   Reply With Quote
Old 08-20-2006, 04:02 PM   #3
Senior Member
 
Join Date: Mar 2006
Location: Ireland
Posts: 534
Total Cats: 0
Default

What ??

1st. Oil Feed Line....goes from a 'port' (take out the bolt) located down under the exhaust manifold, IIR it is the second lower bolt towards the right near the firewall (when your looking directly at the manifold). When you take out the bolt no oil will come out of it....until the engine is turned on.

2nd. Oil return line goes from the Turbo around the front of the engine and plugs into another 'port' (take out the bolt) located on the right side of the oil filter. If looking directly towards the oil filter, is it between the oil filter and alternator (right behind an engine/injector manifold support bracket/bar). Easier to take off that support bar in order to get at it. Remember to ALWAYS have the oil return line going in a continuous downward direction).

What part are you missing ?
Fergus is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 57 07-19-2017 05:11 PM
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 04:00 PM
Back to Stock Part Out!! Turbo Parts, MS2 Enhanced 01-05, Suspension, and MOAR! StratoBlue1109 Miata parts for sale/trade 16 10-02-2015 10:39 AM
Moroso Air Oil Separator Catch Can Aroundcorner Miata parts for sale/trade 2 10-01-2015 04:20 PM
Low oil pressure after 1.8 swap and new turbo setup JesseTheNoob DIY Turbo Discussion 15 09-30-2015 03:44 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 09:16 PM.