I just wanna go fast daddy
 

Tunner Toys Dual Feed fuel rail, 04' Open rear end swap, 1.8 F1 stage 3 clutch, MegaSquirt with IAT sensor, Rx7 460cc injectors. A big thanks to those at DIYautotune, Injector ReHab and TunnerToys!! All great vendors to work with


Need:
1.8 flywheel
LC-1 WB
Rx7 diff


Attachment 212651

Attachment 212652

Attachment 212653

Attachment 212654

Attachment 212655

Also have 1.6 and 1.8 injectors forsale along with the 1.6 fuel rail and Rx7 Mass air senor.

MY vortech fmu is forsale as well

Once i get this all installed im running a Shelby GT500, think i have a shot?

Straight line or with some corners?

Get an AEM WB instead of the LC-1!

All I read is how great the LC1 is. Faster reading, more accurate, compatibile with the MegaPNP. So why AEM?

Some people have issues with them failing and such. I have actually read about it a lot.

That being said, a friend runs an LC1 and hasn't had any issued with it once he grounded it properly. I have an AEM and haven't had issues with it either.

Straight line, but its a convertible which is alittle slower than the hardtop.