Ignitor, COPS and TPS question - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members

DIY Turbo Discussion greddy on a 1.8? homebrew kit?

LinkBack Thread Tools
Old 04-04-2012, 09:05 PM   #1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2011
Posts: 110
Total Cats: 1
Default Ignitor, COPS and TPS question

I have been sifting through the COPS thread but I have some more questions.

I'm running a 1990 Miata with a 1.8 swap. I bought a set of cops and plugs for $20 at a local junk yard. I'd prefer to keep the install as clean as possible and also reversable. I don't want to gut my good ignitor incase I need to go back to the original. Has anyone come up with a plug that is the same as the ignitor?

As for the TPS, I have the original that came on the original motor. I'm using the 1.6 throttle body with the flyin miata adapter plate. I was lucky that the JDM motor came with the harness. Am I right to assume that I can use the 94-97 tps and just wire it into the MSpnp when I get that far?
Wildanimal is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Raleigh: Fiberglass headlight scope, 1.6L ECU, AFM, Hardtop latches, more bigmackloud Miata parts for sale/trade 13 09-22-2017 01:34 PM
Going back to stock. Need some 1.6 parts. Trent WTB 2 10-01-2015 01:15 PM
Low oil pressure after 1.8 swap and new turbo setup JesseTheNoob DIY Turbo Discussion 15 09-30-2015 03:44 PM
01-05 Fab9 PNP COPs (used) FrankB Miata parts for sale/trade 6 09-30-2015 12:48 PM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 04:46 AM.