intercooler coupler q's
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: North Jersey
Posts: 717
Total Cats: 0
intercooler coupler q's
hey fellas,
i'm gonna diy a MSM intercooler into my Begi-S. i have an idea of how i'm gonna run it, but i was hoping to confirm some dimensions before i place an order on couplers.
2" charge outlet on a GT2554?
2" inlet/outlet on the msm intercooler?
2.5" throttle body?
thanks.
i'm gonna diy a MSM intercooler into my Begi-S. i have an idea of how i'm gonna run it, but i was hoping to confirm some dimensions before i place an order on couplers.
2" charge outlet on a GT2554?
2" inlet/outlet on the msm intercooler?
2.5" throttle body?
thanks.
#5
The MSM guys complain to no end that the stock IC is barely adequate for moderate street driving. Anything that could be considered "spirited" or in hot weather results in heat soak. Your turbo isn't any more efficient than the MSM's and you're running the same amount of boost. Plus, the thing is so small it look really dumb sitting there in the middle of the rad.
Unless you can do the whole thing for free, I'd pass and get a universal eBay kit for cheap. The CXRacing 27" is the exact width of the stock radiator making around the rad configurations simple.
Unless you can do the whole thing for free, I'd pass and get a universal eBay kit for cheap. The CXRacing 27" is the exact width of the stock radiator making around the rad configurations simple.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM