Originally Posted by sixshooter
(Post 1228572)
Miatas make very poor drift cars because of their low polar moment of inertia. They are actually very poorly suited to the task for the same reason they do very well in road racing.
I appreciate you keeping your temper in check for the first few responses to criticism. The first post having punctuation and grammar issues, coupled with the mention of drifting (or automotive figure skating), and the fact that this was not in the "Meet and Greet" section drew the negative attention of a few of our members. I'm sure they didn't realize that English was a second language to you and didn't give you the benefit of the doubt. The megasquirt is the most common device for fuel and spark management in Miatas. The eManage is not very popular so there won't be much support info for it here. |
Originally Posted by triple j
(Post 1228587)
I appreciate your reply, I decided not to drift this car is its to good of a car for that, am keeping it as a weekend car while turbocharging it also, I think I will go with the emanage I don't have the ms any more, would u no what psi the stock 1.8 injectors can do safe.
So are you trying to run 1.8 injectors on the 1.6? Why not just swap in a 1.8L? :2cents: |
Originally Posted by Girz0r
(Post 1228597)
Dont run aids, run a megasquirt!
So are you trying to run 1.8 injectors on the 1.6? Why not just swap in a 1.8L? :2cents: |
160-180whp
|
Originally Posted by triple j
(Post 1228607)
Aids is one way to describe a piggyback very true, a little crude but works. The car is a 1.8 with stock 1.8 injectors I am just wondering how much boost the could handle b4 maxing out, I don't mind going bigger but with emanage the tune would work out far better without injector correction.
Originally Posted by triple j
(Post 1153897)
Hi just joined the site from ireland, am in the market for a miata maybe a mk1 1.6, i am planing to turbo it right away, i drive a gt turbo starlets an have done for a few years current one is running a td04 turbo with e manage blue i built and tuned it myself so i no e manage very well and i plan on using one on the miata
|
Originally Posted by Girz0r
(Post 1228619)
Is this on a miata or a starlet? Confused from your OP where you show you're in the market for a mk1 1.6L
|
the stock injectors can dooooooooooooo my guesstimate of 6-ALLOFITpsi
|
Originally Posted by Girz0r
(Post 1228633)
the stock injectors can dooooooooooooo my guesstimate of 6-ALLOFITpsi
|
Originally Posted by Girz0r
(Post 1228633)
the stock injectors can dooooooooooooo my guesstimate of 6-ALLOFITpsi
|
Originally Posted by triple j
(Post 1228647)
Thanks girz0r, that's not enough boost for me so I will use bigger injectors maybe rx7 may do. I am planning on using the Nissan sr20 turbo to run at the least 10psi.
|
1 Attachment(s)
Originally Posted by 18psi
(Post 1228650)
What if I told you that you can run 22 psi and still only make 220whp?
|
I would need so speak to the Oracle on that one lol. 220whp I would be happy with. Would it be a safe level for the stock conrods.
|
Check out the DIY FAQ thread on this forum. Your FAQs are there.
|
Originally Posted by sixshooter
(Post 1228690)
Check out the DIY FAQ thread on this forum. Your FAQs are there.
|
2 Attachment(s)
Originally Posted by 18psi
(Post 1228650)
What if I told you that you can run 22 psi and still only make 220whp?
|
Originally Posted by calteg
(Post 1229170)
Turbo Matrix [IMG]
|
|
All times are GMT -4. The time now is 02:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands