Looking for t3 version of a 2554r
Im looking for a t3 flanged turbo that would be the exact if not similar equivalent to the specs of the gt2554r.
Im basically looking for a cheap chinese ebay turbo i throw onto my other project 1.6 Any help is appreciated! |
45 trim T3. Would be the smallest compressor wheel that would output like a 2554. But with a turbine much larger than the 2554 it will never spool like one. and you wont find a cihnacharger version.
You can use the one I do which is the 50 trim t3...slightly bigger |
Thanks for the info Brain. What kind of power is your 50 trim making making with your 1.6? Can i find this turbo on ebay? :D
|
im making ~236rwhp and ~235rwtq at 15psi.
http://www.boostedmiata.com/gallery2...inacharger.jpg yes it's an "ebay" chinacharger. you need to find the one with a 60mm compressor exducer and 42.xx exducer. A true 2554 would have a similar mid-to-top end, however that spoolup would be more linear to 3500. I can improve the spool a little on that red curve, my EBC is opening a little too soon according to logs. Which is probably why it dips below the curve run at wastegate. |
|
I think your best bet to find the turbo Brain is speaking of is at a junkyard actually, a lot of the older Volvo's had these 45 Trim T3s as well I believe, correct me if I am wrong Braineack?
I assume depending on junkyard you can make away with one for around $100. |
Originally Posted by Squidddd
(Post 717091)
I think your best bet to find the turbo Brain is speaking of is at a junkyard actually, a lot of the older Volvo's had these 45 Trim T3s as well I believe, correct me if I am wrong Braineack?
I assume depending on junkyard you can make away with one for around $100. I dunno, but I cant wait to see your for sale post... |
Just Get a T3 exh housing and you will have exactly what you wanted ;)
|
i would love to just go and buy what exactly what i want but the point i didnt really make clear was to keep it cheap for a extreme budget build for my other miata made for slides ;D
|
+2 for 50trim T3 (zero smoothing) check sig - I have a 3.9R&P
The T3 housing was from a svo mustang, then grabbed some .42ar housing - was a pieced together turbo from parts lieing around, supernaturalturbo.com (Reed - and he has crap load of used turbo parts) |
All times are GMT -4. The time now is 11:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands