max boost that can be run On a 1.8 without an IC
how much boost can safely be run on a 1.8 motor without a Intercooler, Is the limit 7-8psi , how much should timing be retarded to say run it streetable like for say one to two weeks. I was thinking of doing it the greddy way.
|
On the 1.6 greddy kit 6psi at 6* timing were recommended. Why take the chance and run it this way when you don't really have to. Get an I/C sorted out, you'll be happier.
Jay |
or get a WI kit
|
Don't you hav an intercooler?
|
Did you sell both of them? Just boost it untill it explodes.:skid: :eek4: :cry:
|
I ran ~7psi intercooled for some time (a couple months). Ran 6° base before getting the Bipes, but that pinged a bit still. Ran 12° base and pulled to ~4-5° later with the Bipes.
|
Originally Posted by RicanmiataRacer
(Post 79263)
how much boost can safely be run on a 1.8 motor without a Intercooler, Is the limit 7-8psi , how much should timing be retarded to say run it streetable like for say one to two weeks. I was thinking of doing it the greddy way.
I wouldn't boost over 6psi without an intercooler. You're going to have to retard to timing like mad and make your EGTs skyrocket. |
I ran 6psi for ~6 months. Base timing 14, bipes pulled to 6 degrees.
|
Ok then It's just A ?, I have a Intercooler ready to install(12x9x2.5) But I still dont know how the hell im going to get 2.5 inch ic piping to fit with the a/c and p/s pump in the way...I just dont see how, its really crowded
|
I used 2.5" pipes but removed my AC prior to installing the intercooler. The way my pipes are routed would not work with the AC compressor. Sorry I don't have any pics of my pipes on my pc and my car's 2 blocks away in the -15 degree weather.
|
Is it hard to remove the A/C and how much extra room would I have to play with?
can this be a one day project? |
I didn't remove any of the parts in the dash, but what I did wasn't hard, maybe an hour or so. It's also a good way to remove weight before you add the weight of the I/C.
Edit: are you sure you'd rather sacrifice AC in florida than just use smaller pipes before the intercooler? |
but since I have both p/s and a/c I haft to get a belt for ps only don't I?
|
Yeah you need to buy the shorter belt for miatas with p/s and without ac. Most parts stores will have it in stock.
|
Buy Stripes piping kit for $225. It will take minimal effort to adapt it to your turbo. I'm talking minimal.
|
C'mon, don't you want to see him suffer in the FL humidity with no AC?:gay:
|
15-20 psi with water injection easily.
|
Originally Posted by SamS
(Post 79699)
Yeah you need to buy the shorter belt for miatas with p/s and without ac. Most parts stores will have it in stock.
|
Originally Posted by Wideopentuning
(Post 79835)
15-20 psi with water injection easily.
I'd like to see that:eek4: |
Originally Posted by Brian
(Post 79879)
Stock timing? Without an intercooler?
I'd like to see that:eek4: |
All times are GMT -4. The time now is 11:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands