Megasquirt Idle Control Valve Proplem!! - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to   Members

DIY Turbo Discussion greddy on a 1.8? homebrew kit?

LinkBack Thread Tools
Old 08-25-2014, 01:14 PM   #1
Thread Starter
Join Date: Jul 2013
Posts: 4
Total Cats: 0
Default Megasquirt Idle Control Valve Proplem!!

so i went turbo and did a minor wire tuck on my 1993 1.6, ive been having problems with my ms2, the voltages were jumping from 6v to 10v very jumpy and erratic. my sensors were also going nuts the coolant was jumping 30 degrees and my map sensor also! ive been pulling my hair out trying to figure out the problem, well i started unplugging things to see if the problem went away and i found that when i unplug the icv the ms2 loses power.... i bypass the icv with a piece of wire and the ecu has a constant 11 v and the car runs. so should i just bypass the icv???... any input would be apriciated.
Karlman is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 59 12-15-2017 09:00 PM
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 04:00 PM
My solution for Oiltemp and Oilpressure input into Megasuirt (MS3) Zaphod MEGAsquirt 41 01-24-2016 01:25 PM
Time to start learning and play with tuning The Gleas MEGAsquirt 3 10-01-2015 10:30 AM
Any pnp megasquirt for 2001 Big_gumby WTB 0 09-30-2015 04:34 PM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 10:21 AM.