Megasquirt Mounting
 

How have you mounted your megasquirt?

I want to use the stock location but didnt want to drill the new megasquirt to try and fit the stock brackets until I got some feedback.

I was thinking of attaching the PC cable and routing it into the glove box so its always there for easy access to plug into the laptop.

I made a bracket to hold my EMS in the passenger footwell. I have a DIY boomslang, so I was able to make the wires all exactly the correct length.

mine sits where the stock ecu was...I have a usv port in my center console.

at least yours isnt like mine....up and to the left of the clutch pedal....fuck working up in that area, my back hurt for like a week. i probalby should have just removed the seat

Last time I put it in the stock location it fuxord most of my wiring. Putting it back now as we speak, but with some padding I cut up from the carpet I pulled out. Should be nice and snug now.

Velco baby.
Attachment 193402

easy access ftw

Under the driver's seat.

Why hell didn't I think of Velcro. Haha. The harness is keeping mine in place. :giggle:

I'll just place mine where my ecu is at now. I moved it from behind the seat to under the glove box. It's attached by velcro and small bunge cords.:laugh:

It's uber good stuff from Radio Shack, one step up from name brand Velcro. Until the adhesive really sets, it will fail before the "velcro".

I was going to try and use the sock brackets and try and make them fit the MS. But I didnt fancy drilling the case of the MS incase I ruin it. I could put it on the padded matting and cable tie it in place but I liked the idea of the stock ecu been raised off the floor to allow airflow (Limited!).