Megasquirt sequential injection
#3
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
At the ECU side, you will connect the wires from injectors 2 and 4 to the INJ1 function of the Megasquirt (pins 32 and 33, if using the DB-37 connector on a base-level MS1 or MS2), and the wires from injectors 1 and 3 to the INJ2 function of the Megasquirt (pins 34 and 35.)
This will give you the same injector configuration as a stock '90-93 Miata.
Thread
Thread Starter
Forum
Replies
Last Post
Joseph Conley
MEGAsquirt
15
06-27-2016 03:39 PM