Most psi DD on stock na6
Back in the days when Emanage Blue was the hot setup, MS had not been invented yet, and Braineak had less than 1000 posts, I ran the limits of a Nissan SR20det T25. On a 1.6, with full bandaids, 3XXcc injectors are good for for 190-220whp at 15psi on a small T25 (GT2554r and smaller), with the main variable being exhaust size. The difference between 305's and 330's is negligible since the only real thing you have to tune with is fuel pressure, and even after replacing all of the rubber fuel lines at the pump, filter, and rail, I'd be hesitant to run more than 100psi. The stock ECU fights you every step of the way, but the Begi 2025 does have the fidelity to fine-tune as much as the Walbro will push. I have several threads from a few years ago that document in detail everything I did to try and tune my full bandaid setup. It was awesome and I wouldn't trade the learning experience for anything. But pn second thought, I sure as **** would trade all that **** for one afternoon with MS and a laptop to achieve a safer tune with more power on less boost for less money. Anybody who ***** around with bandaids in today's market is dumb.
By full bandaids, I mean Begi 2025 RRFPR, Bipes, o2Clamp, Walbro 190lphHP running 2 checkvalves, RX7 AFM, base timing 16*, and of course the injectors.
As for the OP being a troll... try a ******* title search for the words "limits" "stock" and "internals".
Reply
0
0
Thread Starter
I'm Miserable!
Joined: May 2011
Posts: 38
Total Cats: 0
ill pass on the 240sx. had one. fun. but not as fun as the mini mi. being able to pop hard top on and off in the summer is just SICK! especially when you live near the beach that seems to attract tons of Beaches*** lol
turbo 2 seaters ftw.
i would only blow up to rebuild bigger, better, stronger, fasterrrrr
turbo 2 seaters ftw.
i would only blow up to rebuild bigger, better, stronger, fasterrrrr
Reply
0
0
Reply
0
0
How do you figure 305's will push 250whp? You'd need like 150psi of fuel in the rail, and I don't think a single bandaid'd 1.6 has ever made 250whp.
Back in the days when Emanage Blue was the hot setup, MS had not been invented yet, and Braineak had less than 1000 posts, I ran the limits of a Nissan SR20det T25. On a 1.6, with full bandaids, 3XXcc injectors are good for for 190-220whp at 15psi on a small T25 (GT2554r and smaller), with the main variable being exhaust size. The difference between 305's and 330's is negligible since the only real thing you have to tune with is fuel pressure, and even after replacing all of the rubber fuel lines at the pump, filter, and rail, I'd be hesitant to run more than 100psi. The stock ECU fights you every step of the way, but the Begi 2025 does have the fidelity to fine-tune as much as the Walbro will push. I have several threads from a few years ago that document in detail everything I did to try and tune my full bandaid setup. It was awesome and I wouldn't trade the learning experience for anything. But pn second thought, I sure as **** would trade all that **** for one afternoon with MS and a laptop to achieve a safer tune with more power on less boost for less money. Anybody who ***** around with bandaids in today's market is dumb.
By full bandaids, I mean Begi 2025 RRFPR, Bipes, o2Clamp, Walbro 190lphHP running 2 checkvalves, RX7 AFM, base timing 16*, and of course the injectors.
As for the OP being a troll... try a ******* title search for the words "limits" "stock" and "internals".
Back in the days when Emanage Blue was the hot setup, MS had not been invented yet, and Braineak had less than 1000 posts, I ran the limits of a Nissan SR20det T25. On a 1.6, with full bandaids, 3XXcc injectors are good for for 190-220whp at 15psi on a small T25 (GT2554r and smaller), with the main variable being exhaust size. The difference between 305's and 330's is negligible since the only real thing you have to tune with is fuel pressure, and even after replacing all of the rubber fuel lines at the pump, filter, and rail, I'd be hesitant to run more than 100psi. The stock ECU fights you every step of the way, but the Begi 2025 does have the fidelity to fine-tune as much as the Walbro will push. I have several threads from a few years ago that document in detail everything I did to try and tune my full bandaid setup. It was awesome and I wouldn't trade the learning experience for anything. But pn second thought, I sure as **** would trade all that **** for one afternoon with MS and a laptop to achieve a safer tune with more power on less boost for less money. Anybody who ***** around with bandaids in today's market is dumb.
By full bandaids, I mean Begi 2025 RRFPR, Bipes, o2Clamp, Walbro 190lphHP running 2 checkvalves, RX7 AFM, base timing 16*, and of course the injectors.
As for the OP being a troll... try a ******* title search for the words "limits" "stock" and "internals".
Reply
0
0
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
Sep 30, 2018 01:09 PM
