How is my free turbo?
#1
Senior Member
Thread Starter
Join Date: Jun 2006
Location: Orlando FL - UCF
Posts: 684
Total Cats: 1
How is my free turbo?
I got a free turbo from a buddy of mine who says it is a T25, but doesn't know anything else about it. He used it on his single slam civic setup, and it is tiny.
From the Garrett SN I found it to be off of a 88-90 Pontiac Sunbird GT, but I can not find any maps/info about it.
It is a T25; Turbine .49AR Compressor either .43AR or .48AR, it is hard to tell.
So what am I looking at for the limit of this turbo? All I am looking for is around 200hp at the wheels.
From the Garrett SN I found it to be off of a 88-90 Pontiac Sunbird GT, but I can not find any maps/info about it.
It is a T25; Turbine .49AR Compressor either .43AR or .48AR, it is hard to tell.
So what am I looking at for the limit of this turbo? All I am looking for is around 200hp at the wheels.
#6
It is the exact same specs as a DSM turbo. It's the perfect unit IMHO for a 200whp application. It will spool practically off idle with EBC and still be very efficient in the 10-12psi range you'll need to get there. Anything bigger is really overkill for that power goal. Even my SR20det T25 sacrifices a little spool to that one, but will stay efficient well into the 220-230range.
It also has the benefit of being a standard T2 flange... so your mani and DP will bolt up to practically any other T25/T28 out there (not including the DSM turbo's which use a funky turbine flange), so upgrading to any GT turbo for well over 250whp is just a credit-card away.
My recommendations, UNLESS YOU KNOW FOR SURE IT'S MECHANICALLY SOUND, is to purchase a GPopShop rebuild kit for $80. and it'll be good for 100k miles.
http://www.gpopshop.com/garrettt2kits.html
Here's how to rebuild one:
https://www.miataturbo.net/forum/showthread.php?t=10996
That turbo, plus MS and a Begi Mani/DP combo with 460's a small intercooler will get you 200whp in the 10-11psi range.
You'll need 12psi with bandaids.
It also has the benefit of being a standard T2 flange... so your mani and DP will bolt up to practically any other T25/T28 out there (not including the DSM turbo's which use a funky turbine flange), so upgrading to any GT turbo for well over 250whp is just a credit-card away.
My recommendations, UNLESS YOU KNOW FOR SURE IT'S MECHANICALLY SOUND, is to purchase a GPopShop rebuild kit for $80. and it'll be good for 100k miles.
http://www.gpopshop.com/garrettt2kits.html
Here's how to rebuild one:
https://www.miataturbo.net/forum/showthread.php?t=10996
That turbo, plus MS and a Begi Mani/DP combo with 460's a small intercooler will get you 200whp in the 10-11psi range.
You'll need 12psi with bandaids.
#10
Senior Member
Thread Starter
Join Date: Jun 2006
Location: Orlando FL - UCF
Posts: 684
Total Cats: 1
I am probably going to go with either the BEGi T25 mani, or see what comes up for sale soon. I can custom build my own DP for cheap so that is not a problem. Custom I/C setup. I will probably go with the e-manage as far as tuning unless I can convince myself that megasquirt can be done for cheap enough and be worth the trouble.
#12
Senior Member
Thread Starter
Join Date: Jun 2006
Location: Orlando FL - UCF
Posts: 684
Total Cats: 1
Yeah that is the idea.
I am trying to do this fairly cheaply, and I can always switch the turbo out later. For now though the money I would have been spending on a turbo can go towards something else. Like a clutch.
I am trying to do this fairly cheaply, and I can always switch the turbo out later. For now though the money I would have been spending on a turbo can go towards something else. Like a clutch.
Thread
Thread Starter
Forum
Replies
Last Post