noob help with megasquirt and IAT

Reply Subscribe

Thread Tools

Search this Thread

Apr 30, 2020 | 12:36 PM

90mm_Satsuma

Thread Starter

Newb

Joined: Apr 2020

Posts: 1

Total Cats: 0

From: Washington

deleted

figured it out

Last edited by 90mm_Satsuma; Apr 30, 2020 at 02:53 PM.

Apr 30, 2020 | 01:08 PM

concealer404

Elite Member

iTrader: (3)

Joined: Aug 2011

Posts: 10,917

Total Cats: 2,206

Apr 30, 2020 | 01:36 PM

msmola2002

Senior Member

Joined: Aug 2017

Posts: 637

Total Cats: 326

From: Norwich NY

Apr 30, 2020 | 01:42 PM

user 8202

I'm Miserable!

Joined: Mar 2020

Posts: 164

Total Cats: 4

Quote:

Originally Posted by 90mm_Satsuma

I recently dived into the world of forced induction and bought an mtxl plus wideband and found out it had no narrowband output. Can I run MS2 without a wideband at first start? If not, should I reprogram the wideband to see only narrowband to calibrate it first before installing MS2?
Also, can I tap the stock crossover tube with an IAT sensor? Because I don't have an intercooler yet. If not, can I run MS2 on the stock AFM until then? I've heard that it doesn't give off correct data.
Thanks, '92 na

install your wideband and ms2 at the same time. Research on this site how to setup wide and. Its very easy. Wire up the IAT sensor and lay it in the airbox until you get your turbo sorted.