Not another Churbo thread!! - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Reply
 
 
 
LinkBack Thread Tools
Old 06-24-2010, 11:00 AM   #1
Junior Member
Thread Starter
iTrader: (4)
 
Join Date: Jan 2009
Location: Fife, Scotland
Posts: 296
Total Cats: 4
Default Not another Churbo thread!!

Sorry to be a pain in the ***, but I'm going to be buying a turbo either today or tomorrow and spotted this on eBay UK (avoids the large shipping fee's from US). I ran a GT2554R on my last car, but it ran out of puff a little at the top end, and would like to gain more power up the rev range.

http://cgi.ebay.co.uk/Drift-T28-GT28...#ht_2617wt_926

I'll be running it on my 1.8 with standard engine internals, FM Cast Manifold, big intercooler and free flowing exhaust (2.5"). The aim is around 250rwhp and I'll be running it with 550's and W.I.

Any thoughts on this particular turbo? Looks very close to a GT2560 from what I can see on the Garrett website, with the only different being the Trim is 50 on the Churbo against 60 on the GT2560. I'm not too sure how this will affect the spool / power characteristics.

I also spotted this one, which is watercooled, but again, different turbo specs:

http://cgi.ebay.co.uk/GT28-T28-TURBO...ht_3519wt_1058

Which one would you go for and why?

Last edited by GrahamC; 06-24-2010 at 11:12 AM.
GrahamC is offline   Reply With Quote
Old 06-24-2010, 11:08 AM   #2
Murderator
iTrader: (76)
 
18psi's Avatar
 
Join Date: Apr 2008
Posts: 36,185
Total Cats: 2,582
Default

looks like a 2560 to me too. if that's the powerband you want go for it
18psi is offline   Reply With Quote
Old 06-25-2010, 05:36 PM   #3
Elite Member
iTrader: (17)
 
Join Date: May 2007
Location: NY
Posts: 1,614
Total Cats: 2
Default

Grab a 2876, from what my searching yielded most of the Churbos are hybrids...usually similar comp side, smaller turbine side so they aren't truly as big as they say.....kinda like Hustler
TonyV is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 04:00 PM
My solution for Oiltemp and Oilpressure input into Megasuirt (MS3) Zaphod MEGAsquirt 41 01-24-2016 01:25 PM
Going back to stock. Need some 1.6 parts. Trent WTB 2 10-01-2015 01:15 PM
Leaky Wilwoods mx592 Suspension, Brakes, Drivetrain 1 10-01-2015 01:45 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 10:59 PM.