Oil Drain Length
I have a 1.6 BEGI manifold and a Nissan T25 w/ A/C (no PS). Can anyone tell me how long of a steel braided line I need to reach the oil pan straight fitting?
Thanks. |
I have BEGI 1.8 and T25 /w AC setup. I bought 3ft (pre-cut) and used a little less than half of it. So, at least we know it's under 1.5ft :)
|
Less then 2 feet for sure.
|
We use about 16.5" of stainless line before adding fittings.
Stephanie |
Originally Posted by Stephanie Turner
(Post 290489)
We use about 16.5" of stainless line before adding fittings.
Stephanie |
The best way to find out what length you need is to use a old garden hose,simply cut the garden hose to the length you need and that will give you the exact length of SS line.
|
How simple can it be? Thats one to remeber:)
|
I have a T28 on an AVO manifold (similar orientation to FM's) with oil drain pointing straight down. The only way I could connect things was with 2 45* swivel hose fittings and an NPT-AN adapter at the oil pan. Ended up only using about 10" of the 36" Russell braided hose.
|
All times are GMT -4. The time now is 07:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands