I have a 1.6 BEGI manifold and a Nissan T25 w/ A/C (no PS). Can anyone tell me how long of a steel braided line I need to reach the oil pan straight fitting?

Thanks.

 

I have BEGI 1.8 and T25 /w AC setup. I bought 3ft (pre-cut) and used a little less than half of it. So, at least we know it's under 1.5ft

 

Less then 2 feet for sure.

 

We use about 16.5" of stainless line before adding fittings.
Stephanie

 

I just dealt with one of your stainless drain hoses and if we had been able to get another fitting, I would have cut about 3" off of it.

 

The best way to find out what length you need is to use a old garden hose,simply cut the garden hose to the length you need and that will give you the exact length of SS line.

 

How simple can it be? Thats one to remeber

 

I have a T28 on an AVO manifold (similar orientation to FM's) with oil drain pointing straight down. The only way I could connect things was with 2 45* swivel hose fittings and an NPT-AN adapter at the oil pan. Ended up only using about 10" of the 36" Russell braided hose.