Piecing together a turbo kit, any input?
#23
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2013
Location: Cape Coral, FL
Posts: 155
Total Cats: 1
What is this stupid piece of s*** metal canister right here in the way of my intercooler? I've never seen this on another miata, can I get rid of it?
Maybe this should be turned into a build thread but I'm guessing the mods are the ones who have to move it
#25
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2013
Location: Cape Coral, FL
Posts: 155
Total Cats: 1
Yes that's exactly it. I was wondering what that was if there was an oil cooler or what? It's completely in my way of intercooler mounting and the mani is s4 begi. The guy showed me his emails between him and begi including where they didnt ship him the downpipe he ordered for over a year, where he then cancelled his order and waited another year for a refund
#29
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2013
Location: Cape Coral, FL
Posts: 155
Total Cats: 1
After a couple hours of beginning to take on this project with my novice skill level i've realized that 1. I'm going to need to read a LOT more build threads and 2. This manifold is very obviously not going to work with the a/c
#32
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2013
Location: Cape Coral, FL
Posts: 155
Total Cats: 1
Oh that's a good idea. A lot of the threads pictures dont work. Would I basically drill a large hole it the wheel well in the engine bay or directly behind the headlight like 18psi (although slightly different since mines an NA) and route it like that? I guess that would work but not with these pipes I got. Ill have to get more. Would you recommend heat shielding the a/c compressor (and lines?) Do all miatas with a/c have the canister and thin radiator in front of the regular radiator?Would this affect flow to the radiator even worse with the intercooler rather than not having a/c? Sorry for the super noob questions, this is my first experience with a turbo ever
#33
Oh that's a good idea. A lot of the threads pictures dont work. Would I basically drill a large hole it the wheel well in the engine bay or directly behind the headlight like 18psi (although slightly different since mines an NA) and route it like that? I guess that would work but not with these pipes I got. Ill have to get more. Would you recommend heat shielding the a/c compressor (and lines?) Do all miatas with a/c have the canister and thin radiator in front of the regular radiator?Would this affect flow to the radiator even worse with the intercooler rather than not having a/c? Sorry for the super noob questions, this is my first experience with a turbo ever
#36
you should have just asked begi what gauge the pipes are and measured them. Thats the only true way to know as how do u know he isnt selling a knock off and running the begi manifold or whatever. Anyways i cannot give any info on the fender intercooler setup as i've never dug into that area. Mine is an over the rad setup and would do it again because of how neat and solid it came out.
#37
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2013
Location: Cape Coral, FL
Posts: 155
Total Cats: 1
Hes not running turbo hes runnimg hi comp pistons and going with itbs. Ill measure the piping and ask begi but I saw the emails so I assume its legit. If not I can get my money back I didnt pay the full amoumt yet just a down payment and he let me hold onto some parts. And when I pay the rest he will give me the rest of the parts like voodoo box, bipes, turbo, oil lines and fittings, etc.
#39
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2013
Location: Cape Coral, FL
Posts: 155
Total Cats: 1
Okay so I want to run megasquirt obviously but at this point i dont feel that i need the best system as my goals are very moderate (180-225whp) for the time being with the possibility of upping it to the stock internals' limits. I am wondering if the MS1 will be sufficient for my needs. Obviously the MS2 or MS# would be better, but I'm on a really tight budget and the MS! was sufficient at one time for this so I'm wondering if you guys would reccomend the MS1 as a standalone to run my car. I'm looking for the basic fuel and timing control, as well as ease of tuning for a noob like me (i've never tuned an ecu before and have absolutely no knowledge about doing so) and possibly knock sensing. I was thinking of running MBC, but if this computer has EBC I might go ahead and do that after I get the feel for what I'm doing, but I feel like the MS1 would be a much better potion than running the Voodoo box with Bipes or MSD. So, would you guys reccomend this system MegaSquirt-I Programmable EFI System PCB3.0 - Kit w/ BLACK CASE DIYAutoTune.com to be run as a standalone or would you reccomend against doing so. Like I said, the MS2 is out of my budget for the time being, but from what I've read the MS1 can be upgraded to MS2 if I wanted to. My good friend builds motherboards for electric scooters as well as for his own use in gardening and hydroponic systems and such, so he has agreed to assemble the unit if I decide to go that route, so I can save some money over the pnp unit. Any input from yall would be great, and the MS seems like the best option for power to tune my car as well s support from so many people on here that are running it over another system like Link, Hydra (which is obviously WAY out of my budget) etc. Thanks for any suggestions guys