NC stock fuel pump capacity? FI guys input needed
#1
NC stock fuel pump capacity? FI guys input needed
There will soon be an LSX kit released for the NC. In preparation for this project I have purchased a 2008 PRHT.
One unknown is regarding fuel delivery, and what changes will be needed with the NC fuel system to deliver the needed volume of fuel for the LSX motors (FYI they run at 58 psi).
Does anybody know the pressure and flow ratings of the stock pump?
Do you turbo/guys have to upgrade the OEM fuel pump? If so, what is the route taken (larger in tank primary, addition of secondary in-line, etc.)?
Anybody know if the stock pumps are the same for all 2006-2010 cars?
Does Mazda share this pump assembly between any different models (like the RX-8)?
Thanks,
Justin Wade
One unknown is regarding fuel delivery, and what changes will be needed with the NC fuel system to deliver the needed volume of fuel for the LSX motors (FYI they run at 58 psi).
Does anybody know the pressure and flow ratings of the stock pump?
Do you turbo/guys have to upgrade the OEM fuel pump? If so, what is the route taken (larger in tank primary, addition of secondary in-line, etc.)?
Anybody know if the stock pumps are the same for all 2006-2010 cars?
Does Mazda share this pump assembly between any different models (like the RX-8)?
Thanks,
Justin Wade
#3
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,192
Total Cats: 1,135
Most modern fuel injection systems are 100ish psi. Our stock pumps (NA and NB) are fine up to that. They do fail, usually with age, and walbros cost roughly the same as stock.
Your problem is I can't name one person on this board with an NC.
Your problem is I can't name one person on this board with an NC.
Thread
Thread Starter
Forum
Replies
Last Post
Jike Spingleton
Cars for sale/trade
3
09-20-2016 04:33 PM