Quesiton about NB Turbo - Page 2 - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


DIY Turbo Discussion greddy on a 1.8? homebrew kit?

Reply
 
 
 
LinkBack Thread Tools
Old 08-15-2006, 11:52 PM   #21
Senior Member
iTrader: (1)
 
Join Date: Dec 2005
Location: irvine, ca
Posts: 729
Total Cats: 0
Default

Act
kung fu jesus is offline   Reply With Quote
Old 08-16-2006, 02:09 PM   #22
Elite Member
iTrader: (7)
 
samnavy's Avatar
 
Join Date: Apr 2006
Location: VIRGINIA BEACH, VA
Posts: 6,020
Total Cats: 175
Default

I researched clutches for about a month before getting a SPEC Stage2. In all my research here, m.net, and a few other forums, I couldn't find one thing that said one aftermarket clutch was better than any other. SPEC, ACT, Exedy, RPS, are all are in the same general price range per stage.

If you're talking about a puck clutch, this doesn't apply, but for the most part, "a slight to moderate increase in pedal pressure with better overall control and modulation" was what everybody said about every clutch.

I went with the cheapest I could find out of the major brands in a Stage2, and that was the SPEC, I paid $310 delivered for my '93.
http://www.jdsperformance.com/spec.a...iata&fcmd=cars

I don't think you'll find anybody around here who will say "An XXX clutch is definitely better than a YYY clutch because of blah blah blah." At least I couldn't. As far as I found, they're all pretty much the same within each stage.
samnavy is offline   Reply With Quote
Old 08-16-2006, 10:28 PM   #23
Newb
Thread Starter
 
Join Date: Aug 2006
Posts: 12
Total Cats: 0
Default Thanks

Samnavy I like your info it was informative...LOL
spaceman is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 57 07-19-2017 05:11 PM
WTB MP62 (Hotside) (NB2) Rick02R WTB 3 01-03-2016 08:18 PM
Expected intake temps on the track? tazswing Race Prep 20 10-03-2015 12:04 PM
ISO 1.6 turbo cast iron manifold cale saurage DIY Turbo Discussion 16 10-01-2015 12:25 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 08:43 PM.