Reaching the EGR tube for a blockoff plate
So I got my blockoff plate and nut to remove EGR. I went out to install it today and promptly gave up do to not being able to reach it. How do I reach the part where the tube enters the intake manifold from the exhaust manifold? Do I have to remove the IM or the support brace or something?
EDIT: Also, stupid question, but I have to remove the EGR valve aswell? Or can I just half-ass remove it's vaccum source (If it has one) or something similar? |
Curious as to the answer of this too, I have a screw jammed inside my egr tube for now and would really like to do this.
|
On my '99 it's pretty easy to reach the two M6 bolts that hold the tube to the back of the IM.
|
Deleted
|
Originally Posted by SolarYellow510
(Post 526428)
On my '99 it's pretty easy to reach the two M6 bolts that hold the tube to the back of the IM.
|
I just reached around on my '99 as well and removed the two bolts. It might actually be a stud and a bolt. I can't remember.
|
Forgot about the one that supports the middle of the tube on the back of the heater outlet under the coil packs. Another reason to go COP.
|
All times are GMT -4. The time now is 01:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands