|
I suggested basically what you have, but in words
|
I guess I'll just sort that out when the engine is back in the car so I can see what will fit. Clutch is supposed to be here Wednesday
|
Any update on this? I'm running a similar sized turbo on my 1.8 (t3/t4 w/ .48 ar turbine and 71mm compressor exducer) and it's fun but the spool leaves much to be desired. Really considering picking this turbo up.
|
stop talking about it and just do it.
here's a link for you all to read: https://www.miataturbo.net/build-thr...-yellow-48386/ notice on post #7 he shows off his T3/T4 chinaturdo. then 30 days later he switches it out for the turbo I, your humble admin, suggested in post #49. I think this sums it up:
Originally Posted by underdog
(Post 595694)
I just went for a quick ride...now that is more like it! I guess I have a pretty low tolerance for turbo lag and just love my midrange power way too much to sacrifice it for top end.
Told you. :brain: his dyno results were what I expected, but he was giving up a bunch of midrange (compared to my setup) by ingoring my suggestion of going to a 3" exhaust: https://www.miataturbo.net/dynos-tim...y-setup-56729/ 220tq and 250hp on a dynojet. So keep on fighting the urge to run a good cheap turbo and enjoy your slow-spooling, slow, pos, no-torque setup. |
Make sure you check torque on all your CHRA bolts.
|
Originally Posted by Braineack
(Post 1164977)
stop talking about it and just do it.
here's a link for you all to read: https://www.miataturbo.net/build-thr...-yellow-48386/ notice on post #7 he shows off his T3/T4 chinaturdo. then 30 days later he switches it out for the turbo I, your humble admin, suggested in post #49. I think this sums it up: his dyno results were what I expected, but he was giving up a bunch of midrange (compared to my setup) by ingoring my suggestion of going to a 3" exhaust: https://www.miataturbo.net/dynos-tim...y-setup-56729/ 220tq and 250hp on a dynojet. So keep on fighting the urge to run a good cheap turbo and enjoy your slow-spooling, slow, pos, no-torque setup. |
| All times are GMT -4. The time now is 05:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands