Rx7 460cc Injector Adapters
Hey, I know this has kind of been asked before but I could not find a clear enough answer. I hope it is alright I ask again.
I have rx7 red tops mn: 195500-1350 and I didn't realize they use a different socket than my 94 oem injectors. What adapter do I need to make these work? Will this do the trick? Specializing in automotive interconnect and wiring systems Or will these be better? Fuel Injector Clip Miata WRX STI 350Z Supra Camry Corolla Celica GS300 IS300 RX7 | eBay Thanks for all the help. |
Those not only have the wrong connector, they are low impedance. Unless your ECU has low-imp injector drivers, you're better off selling them and picking up a set of high-imp injectors, preferably S5 TII purple 195500-2020s. Or, if you want a better injector and don't need ~275whp of fuel capacity, the Rx8 420s are a far superior injector to any EV1 Rx7 unit.
|
Honestly you can do the Mustang GT500 EV14 injectors for less then $200. There really is no reason to go with any other cheaper used options. Once you factor in getting used injectors cleaned you are almost at what the mustang injectors cost and are still using an older worse injector.
|
Originally Posted by Savington
(Post 1183028)
Those not only have the wrong connector, they are low impedance. Unless your ECU has low-imp injector drivers, you're better off selling them and picking up a set of high-imp injectors, preferably S5 TII purple 195500-2020s. Or, if you want a better injector and don't need ~275whp of fuel capacity, the Rx7 420s are a far superior injector to any EV1 Rx7 unit.
|
Red 1350s should be low impedance. Purple 1350s should be high impedance. Both will be squares.
|
Originally Posted by Savington
(Post 1183028)
Those not only have the wrong connector, they are low impedance. Unless your ECU has low-imp injector drivers, you're better off selling them and picking up a set of high-imp injectors, preferably S5 TII purple 195500-2020s. Or, if you want a better injector and don't need ~275whp of fuel capacity, the Rx7 420s are a far superior injector to any EV1 Rx7 unit.
|
Originally Posted by concealer404
(Post 1183081)
Red 1350s should be low impedance. Purple 1350s should be high impedance. Both will be squares.
https://fbcdn-sphotos-h-a.akamaihd.n...0624284487e65a |
Originally Posted by aidandj
(Post 1183084)
I believe you meant rx8 right? The EV-6s?
|
1 Attachment(s)
will these do the trick?
Specializing in automotive interconnect and wiring systems Here are the injectors im trying to use model number 195500-1350 and have 12.2 ohms Attachment 234857 |
All times are GMT -4. The time now is 07:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands