Status update / parts list
Thread Starter
Elite Member
iTrader: (24)
Joined: Jun 2007
Posts: 4,667
Total Cats: 18
From: Woodland Hills, CA
Status update / parts list
What is here already:
440cc injectors
manifold
gt2560r
2x 10" 1500cfm slim fans
all the lines for turbo
intercooler
megasquirt pnp
What is coming by end of next week:
godspeed radiator
begi throttle body inlet pipe
turbo studs and nuts
down pipe
turbo heatshield
turbo blanket
What is left to do:
clean the injectors
install everything
dyno tune
have fun
440cc injectors
manifold
gt2560r
2x 10" 1500cfm slim fans
all the lines for turbo
intercooler
megasquirt pnp
What is coming by end of next week:
godspeed radiator
begi throttle body inlet pipe
turbo studs and nuts
down pipe
turbo heatshield
turbo blanket
What is left to do:
clean the injectors
install everything
dyno tune
have fun
Reply
0
0
Thread Starter
Elite Member
iTrader: (24)
Joined: Jun 2007
Posts: 4,667
Total Cats: 18
From: Woodland Hills, CA
for those who havent seen this sucker yet - http://www.atpturbo.com/Merchant2/me...egory_Code=BCS
greddy heat shield for pretty cheap
greddy heat shield for pretty cheap
Reply
0
0
sweet deal dude, sounds like you are just about there
make sure you send your injectors to the slutty maids ad above, lol
hopefully ill be making a thread similar to yours here very soon
make sure you send your injectors to the slutty maids ad above, lol
hopefully ill be making a thread similar to yours here very soon
Reply
0
0
Already shot my load, enjoy your sloppy seconds.
http://www.injector-rehab.com/frontd....php?att_id=16
C
http://www.injector-rehab.com/frontd....php?att_id=16
C
Reply
0
0
Nice heatshield, does it bolt to one of the exhaust housing bolts?
Edit: I could probably build one just like it out of diamond plate and secure it the same way.
What IC did you get?
Edit: I could probably build one just like it out of diamond plate and secure it the same way.
What IC did you get?
Last edited by Saml01; Mar 4, 2008 at 10:55 AM.
Reply
0
0
Thread Starter
Elite Member
iTrader: (24)
Joined: Jun 2007
Posts: 4,667
Total Cats: 18
From: Woodland Hills, CA
big = good
i decided to go all the way with power. lets see if i can hit 270whp on current setup. i know that i can go into 300s if i build my block and that '99 head ben is sending me but im just curious to see where completely stock engine will take me.
ps: looking at clutches already because my clutch will not last more then 2 hours with all that power
i decided to go all the way with power. lets see if i can hit 270whp on current setup. i know that i can go into 300s if i build my block and that '99 head ben is sending me but im just curious to see where completely stock engine will take me.
ps: looking at clutches already because my clutch will not last more then 2 hours with all that power
Reply
0
0
270hp with a GT2560? What else have you done to the engine, Slavic?
Reply
0
0
