Tullos Tech EBC Tuning
#1
Elite Member
Thread Starter
iTrader: (13)
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Tullos Tech EBC Tuning
Hey is anyone on here running the Tullos Technology EBC?
I've had mine installed but i've just been running off the WG because I don't have the fuel setup to run higher than 8 psi right now. I'm trying to tune the EBC so that it reads the correct psi while under boost. I'm doing this by comparing it to a mechanical autometer boost gauge.
You supposedly do this by adjusting the WG percentage for the boost value you have set and lower the percentage until it reads the correct boost value. I'm just curious if anyone has messed with this much.
Currently i have the EBC set to 8 psi and it never reaches 8psi on the screen under boost and my Autometer gauge only reads up to 7 psi which is the spring i have in the Tial.
Anyone?
I've had mine installed but i've just been running off the WG because I don't have the fuel setup to run higher than 8 psi right now. I'm trying to tune the EBC so that it reads the correct psi while under boost. I'm doing this by comparing it to a mechanical autometer boost gauge.
You supposedly do this by adjusting the WG percentage for the boost value you have set and lower the percentage until it reads the correct boost value. I'm just curious if anyone has messed with this much.
Currently i have the EBC set to 8 psi and it never reaches 8psi on the screen under boost and my Autometer gauge only reads up to 7 psi which is the spring i have in the Tial.
Anyone?
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM