Turbo discussion 400+hp
Reply
0
0
Reply
0
0
400+ hp miata is awesome traction is 100% the killer. My car hooks with huge slicks on it. I cut the hell out of the fenders and stuffed some hoosier 26x8.5" tires under it it gets traction all the time. On the street I run Mickey Thompson et streets and even those strugle to put the power down below 60 mph. If you want 400hp listen to soviet or do an LS swap or something like that. But I can only say that if you really really want 400hp be prepared for tires and rear axles. With good street tires my car is a hunk of crap. Wheel spin like crazy all the way thru 4th gear. I am talking 90 mph violent rev limiter banging wheel spin. So that being said I love my car and how fast it goes and to me it still seems slow because all the guys I have out with have 650-1000hp cars lol
Reply
0
0
I've picked up a 6 speed and a 3.9 already in the car (na6) I won't beat on the car that hard all the time
already have brakes suspension and chassis braces in the car too but it is my daily I figure well have the motor out and back in in less than 12 hours at the shop I have it down to where the last thing I need to do if fab a downpipe for the custom top mount t3 manifold I have
already have brakes suspension and chassis braces in the car too but it is my daily I figure well have the motor out and back in in less than 12 hours at the shop I have it down to where the last thing I need to do if fab a downpipe for the custom top mount t3 manifold I haveYou have to ask yourself some of the following questions.
When you step on the gas four or more times, what parts are going to explode or fall off the car?
Will the car actually move in a forward direction efficiently with the power you are putting down?
Will the car actually stay on the road when turning?
If the car does leave the road, will you live or die?
Reply
0
0
I currently own a little turbo Miata I picked it up already boosted so it's "stock" to me
Needless to say it's getting a little boring at 200ish hp and I don't like the way it was done. The only way for me to feel like I actually did something is a crazy build my way. I've ridden In or driven a few ~300hp ones there fast no dought. I just want to feel like I really did something and I'm a little nuts I guess. Gary The guy that owns track dog racing (There local for me) asked me if I was "******* retarded" in his office.
Needless to say it's getting a little boring at 200ish hp and I don't like the way it was done. The only way for me to feel like I actually did something is a crazy build my way. I've ridden In or driven a few ~300hp ones there fast no dought. I just want to feel like I really did something and I'm a little nuts I guess. Gary The guy that owns track dog racing (There local for me) asked me if I was "******* retarded" in his office.
Reply
1
1
Joined: Jun 2005
Posts: 19,338
Total Cats: 574
From: Fake Virginia
already have brakes suspension and chassis braces in the car too but it is my daily I figure well have the motor out and back in in less than 12 hours at the shop I have it down to where the last thing I need to do if fab a downpipe for the custom top mount t3 manifold I have
Good luck. Please document how daily you drive this car after it has 450hp. Or rather how it is more of a "daily repair" car.
Reply
0
0
Joined: Sep 2010
Posts: 8,146
Total Cats: 1,087
From: Lake Forest, CA
This thread really could have been finished after 18PSI's reply.
Reply
0
0
I can dead hook a 40 roll I 2nd gear with these toyos but it takes alot off throttling off the line too get the car too hook on the street
Last edited by y8s; Jun 5, 2017 at 02:18 PM. Reason: url tags
Reply
0
0
thanks! Honestly I'm already bored with it I need too do longer gears and larger injectors and crank it up too 35psi and see what I can make
Reply
0
0
Newb
Joined: Oct 2009
Posts: 28
Total Cats: 0
From: Avondale, AZ
Reply
0
0
Senior Member
Joined: Mar 2017
Posts: 675
Total Cats: 192
From: Granbury Texas
Just search miata on Dallas Craigslist.
He's trying to sell it.
I couldn't make heads or tails of the "dyno chart" but it may be because I'm unfamiliar with that software...
Not appealing to me. NA8 based
He just updated his post on CL for YOU 18PSI!
It is first on the list
He's trying to sell it.
I couldn't make heads or tails of the "dyno chart" but it may be because I'm unfamiliar with that software...
Not appealing to me. NA8 based
He just updated his post on CL for YOU 18PSI!
It is first on the list
Reply
0
0
