Water pump inlet tube options/help need.
4 Attachment(s)
Might be a noob question but I have searched and come up with nothing other than the stock msm piece.
What options are out there for the water pump inlet tube The motor is a 94 with no ps, ac or heater. Turbo is a 2560R, not sure about the manifold. https://www.miataturbo.net/attachmen...ine=1367198909 https://www.miataturbo.net/attachmen...ine=1367198909 |
Check my build thread I run the stock one flipped around, so does soviet. It requires the use of slim fans though. You can also use any of the water neck options depending on how you are going to run your cooling setup.
|
1 Attachment(s)
I'm using the stock one flipped around too. I'm just running a stock automatic radiator and fans and it fits fine. That black hose now connects to a -10 push lock thats threaded on that fitting pointing up. The heater core line is a custom hard line that runs above the turbo manifold to another push lock on the other side near the firewall.
https://www.miataturbo.net/attachmen...ine=1367246414 |
Basically what these guys said: you either flip the stocker and modify it to work, or you buy the begi kit that does the same thing, just a little neater/cleaner
|
Thanks guys that is what I was looking for. Doing my best at reading everything I can, ears open and mouth shut.
|
Does flipped water inlet clear ps pump and belt?
|
Originally Posted by Hungry-R
(Post 1061634)
Does flipped water inlet clear ps pump and belt?
|
/\ Not true at all.
Begi s4 requires it flipped and clears both ps and ac But to answer the question: yes, if done right (or begi piece used) it should clear. |
Originally Posted by 18psi
(Post 1061641)
/\ Not true at all.
Begi s4 requires it flipped and clears both ps and ac But to answer the question: yes, if done right (or begi piece used) it should clear. |
Not the actual inlet, but the hose going from it is directly under the turbo on the s4. But I see what you were referring to now
|
3 Attachment(s)
Here's what I did
https://www.miataturbo.net/attachmen...ine=1381475237 https://www.miataturbo.net/attachmen...ine=1381475237 https://www.miataturbo.net/attachmen...ine=1381475237 Clears PS + belt ok. and work with the 50mm radiator + OEM fan |
Originally Posted by muoto
(Post 1061895)
Here's what I did
Clears PS + belt ok. and work with the 50mm radiator + OEM fan |
All times are GMT -4. The time now is 04:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands