What catalytic converter on your turbo car?
#1
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
What catalytic converter on your turbo car?
Decided I might as well be compliant with laws..
Planning on installing a high flow cat after I finish the built motor cause my current one will be dead very soon.
Need 3" and prefer factory flanged bolt on... What do ya have?
Planning on installing a high flow cat after I finish the built motor cause my current one will be dead very soon.
Need 3" and prefer factory flanged bolt on... What do ya have?
#5
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
With 1,993 posts and 1.8 years on this forum, matter of fact I did.
Guess I didn't really state my purpose of thread, I'm interested in opinions not just what everyone has.
Searching "Catalytic Converter" returned 305 threads, which the first 2 pages of didn't strike me as very informative.
After seeing your torque curve with that cheap cat I'd be very interested to see what a better (maybe?) cat might do for you. What brand did you pickup? Assume its a universal weld in for your v-band setup?
Guess I didn't really state my purpose of thread, I'm interested in opinions not just what everyone has.
Searching "Catalytic Converter" returned 305 threads, which the first 2 pages of didn't strike me as very informative.
After seeing your torque curve with that cheap cat I'd be very interested to see what a better (maybe?) cat might do for you. What brand did you pickup? Assume its a universal weld in for your v-band setup?
#6
With 1,993 posts and 1.8 years on this forum, matter of fact I did.
Guess I didn't really state my purpose of thread, I'm interested in opinions not just what everyone has.
Searching "Catalytic Converter" returned 305 threads, which the first 2 pages of didn't strike me as very informative.
After seeing your torque curve with that cheap cat I'd be very interested to see what a better (maybe?) cat might do for you. What brand did you pickup? Assume its a universal weld in for your v-band setup?
Guess I didn't really state my purpose of thread, I'm interested in opinions not just what everyone has.
Searching "Catalytic Converter" returned 305 threads, which the first 2 pages of didn't strike me as very informative.
After seeing your torque curve with that cheap cat I'd be very interested to see what a better (maybe?) cat might do for you. What brand did you pickup? Assume its a universal weld in for your v-band setup?
High flow magnaflow? Not terribly high flow. Metal`Cat kicks their ***.
#7
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
as mentioned above, that brand. I got it also at JC oddly enough. they were sold out for a year or three. back now though.
Metal Cat 3.0" Inlet/Outlet Stainless Steel Catalytic Converter : JC Whitney: Auto Parts & Accessories
I'll have to cut out the current one and weld flanges on both the exh and cat. no big. at least no big once I get my welder back from brian!
#9
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
one dollar per cell!
here, if you're cheap.
Magnaflow HI-FLO Univ Spun Metallic Converter 3 59959
MAGNAFLOW HI FLOW UNIVERSAL CONVERTER 54959
here, if you're cheap.
Magnaflow HI-FLO Univ Spun Metallic Converter 3 59959
MAGNAFLOW HI FLOW UNIVERSAL CONVERTER 54959
#19
FYI - PerformancePeddler sells the Metal Cat brand much cheaper than JCWhitney
http://www.performancepeddler.com/de...T_ID=SUP200605 $134.99
They knocked it down to $125 when I called for "best available pricing". Always free shipping
Performance Peddler drop ships these direct from the manufacturer same as JCWhitney.
http://www.performancepeddler.com/de...T_ID=SUP200605 $134.99
They knocked it down to $125 when I called for "best available pricing". Always free shipping
Performance Peddler drop ships these direct from the manufacturer same as JCWhitney.