Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)
-   -   What turbo do you have? (https://www.miataturbo.net/diy-turbo-discussion-14/what-turbo-do-you-have-74602/)

ashm330 08-24-2013 12:10 AM
What turbo do you have?
 
Hi I'm after some advice,

I currently have a TD05 hybrid turbo on my 1600cc MX5. Makes 18psi by 3800 rpm and produces 284hp atw at 6200rpm. However I think there is a much better suited turbo out there. I would like something that comes on boost much earlier and efficently pushes 30+ psi by 3200rpm and is still capable of flowing 650cfm.


Considering a brand new Garrett GTX2863r... Maybe a Holset as they are rated to 50+ psi, unfortunately there isn't much info out there about them... and they are generally way too big for what I require

Does anyone have any suggestions or knows someone that has a 350+hp set up that is torquey as hell?

thenuge26 08-24-2013 02:24 AM
BORG WARNER S366





































/thread

ashm330 08-24-2013 03:23 AM
Look and sound cool but a bit big for what I'm after... Kiss goodbye to mid-range torque and responsiveness

18psi 08-24-2013 03:52 AM
efr6258 or 6758

viperormiata 08-24-2013 12:19 PM
1 Attachment(s)
This'll get you to 30+psi by 3k

https://www.miataturbo.net/attachmen...ine=1377361153

FRT_Fun 08-24-2013 12:39 PM
Originally Posted by viperormiata (Post 1046905)
FTFY

aaronc7 08-24-2013 12:41 PM
18psi is spot on, that should give you lots and lots of low end torque, with a great top end as well.

From the garrett front, GTX2863 or GTX2867 should also serve you well.

Leafy 08-25-2013 10:15 PM
I have a 6758. Currently only running it at 10psi because any more and I'll be breaking 5 speeds too often.

.one lane 08-25-2013 11:06 PM
I have a 2560, but I still need to gather some more pieces before installing it.

triple88a 08-25-2013 11:10 PM
My turbo goes chuchuchuuuohhh.

Braineack 08-26-2013 07:28 AM
I'm all for the EFR6258.

concealer404 08-26-2013 08:35 AM
Originally Posted by ashm330 (Post 1046818)
Hi I'm after some advice,

I currently have a TD05 hybrid turbo on my 1600cc MX5. Makes 18psi by 3800 rpm and produces 284hp atw at 6200rpm. However I think there is a much better suited turbo out there. I would like something that comes on boost much earlier and efficently pushes 30+ psi by 3200rpm and is still capable of flowing 650cfm.


Considering a brand new Garrett GTX2863r... Maybe a Holset as they are rated to 50+ psi, unfortunately there isn't much info out there about them... and they are generally way too big for what I require

Does anyone have any suggestions or knows someone that has a 350+hp set up that is torquey as hell?

Techsalvager, is that you?

Braineack 08-26-2013 08:38 AM
If you really want a turbo that can do the above, you need to stop thinking GTX and start thinking EFR. and then still come back to reality...

mazpr 09-09-2013 06:30 PM
Proud owner of a chinacharger, ilovetacotaco, T3/T4 .50 trim, works like a charm at 15 psi with 550cc. For now on bandaids, lots of fun...

triple88a 09-10-2013 12:24 PM
LoL u've been a member of this forum for about 5 years and running on bandaids? Your parents dropped u on ur head few too many times didnt they?

thangcu35 09-13-2013 01:31 PM
I have a GTX2863r and never looking back

mazpr 10-20-2013 06:31 AM
What did u buy after all?

triple88a 10-20-2013 12:05 PM
1 Attachment(s)
Originally Posted by mazpr (Post 1064822)
What did u buy after all?
He bought some of these instead.

https://www.miataturbo.net/attachmen...ine=1382285107

On a side note not sure why you'd wake this bitch up again.


All times are GMT -4. The time now is 06:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands