Notices
DIY Turbo Discussion greddy on a 1.8? homebrew kit?

What to use for EM

Old Mar 17, 2007 | 03:16 PM
  #1  
shifttosixth's Avatar
Thread Starter
Newb
 
Joined: Mar 2007
Posts: 37
Total Cats: 0
From: Chicago/Northern Burbs
Default What to use for EM

Ok so Im contemplating doing a DIY kit, now I was thinking about going with the FM link? I know that there are a few other options out there, Xede, Emanage, Megasquirt. Now from what Ive read it seems like nobody really has had much experience with the Xede. Ive heard complaints about the Emanage, and I have a buddy who uses the megasquirt and says its complicated, so that leaves me with the Link. Do you guys have any other suggestions or options I should consider? Im going to probably run 12psi, so no bipes. But if Im already going to get a FM link and a gt2560r i might as well just buy a kit.
Thanks
Old Mar 17, 2007 | 06:33 PM
  #2  
greddymx5's Avatar
Junior Member
iTrader: (1)
 
Joined: Oct 2004
Posts: 453
Total Cats: 0
From: Haarlem ,the Netherlands
Default

tec 3 , hydra , aem...
All are very powerful ecu's... The link is very good, but not for ultimate power... Other ecu's are better.
Old Mar 17, 2007 | 06:40 PM
  #3  
mazda/nissan's Avatar
Elite Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 2,075
Total Cats: 0
From: Lexington, SC
Default

you could try 93mimi's setup (i've been it's posterchild lately) by tuning and altering an rx7 MAF to run until you can upgrade to a better system. But of course it won't be nearly as adjustable or *perfect* as a standalone or piggyback since it is sumwhat ghetto.... Yet he was able to run about 18 psi on it I do believe.

https://www.miataturbo.net/forums/showthread.php?t=1026 <= his thread


Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:03 PM.