ctdrftna

iTrader: (1)

like the title says, where are you getting and returning water for your turbo?
i want this to look clean

curly

iTrader: (25)

There's a plug in the block right next to the one everyone uses for the oil feed. Driver side, half way down the block, up against the transmission. For return I believe people use a line that you've removed. Like many of us, you've blocked off the front thermostat housing for your reroute.

You can see the feed in this picture:

crnrhrd

Front of the motor picture on page 20

http://flyinmiata.com/support/instru...all_turbos.pdf

ctdrftna

iTrader: (1)

ok so the lower one is oil and the upper one is water??
that works for me, i have a bung welded into the rad end tank already

curly

iTrader: (25)

Correct. Sounds like you've got it figured out, can't wait for the gorgeous over-engineered solution pictures.

KPLAFIN

iTrader: (1)

+1, you must be German.

ctdrftna

iTrader: (1)

im not nearly as overengineered as id like to be, budget and the desire to drive this think keeps me from going overboard