Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)
-   -   Will 97 ECU run supra 305cc injectors. (https://www.miataturbo.net/diy-turbo-discussion-14/will-97-ecu-run-supra-305cc-injectors-16287/)

Cody Strife 01-28-2008 12:10 AM

Will 97 ECU run supra 305cc injectors.
 
Hey everybody, i'm about to purchase a bell series 1 turbo kit. Will the 1997 ECU with Walbro 190lph-hp run the supra 305cc injectors appropriately with a Begi Multirole Rising Rate regulator that allows for stock idle pressure to be adjusted? If not, what fuel injectors would allow me some headroom to reach 9-10 psi without going standalone?

SamS 01-28-2008 12:37 AM

Yes, my 96 ecu idled supra green tops just fine, although a little rich. I also have a begi fpr and 190hp pump.

msydnor 01-28-2008 08:11 AM

If it's any help, the supra injectors idle fine on my stock ECU for my 2004 MSM, and the ECUs on these are really crappy.

Braineack 01-28-2008 09:15 AM

its a 15% increase, it should be enough that the ecu can compensate. I idled them like stock on my 1.6L albeit AFM adjustments ;)

Cody Strife 01-28-2008 08:05 PM

Is it possible to generate 210-220 horsepower with a stock ECU, 305cc injectors, Begi Rising Rate FMU, and 190 LPH-HP fuel pump?

Braineack 01-28-2008 08:57 PM

yeah i did it with plenty of fuel to spare. timing retard?

emmi 01-28-2008 09:23 PM

im also interested in this for my nb, are they just pnp? or would i have to do some wiring/harness work?

Cody Strife 01-28-2008 09:52 PM

Dang, well how much boost do you think I could push on a typical GT2560R turbo equipped with this fuel setup?

paul 01-28-2008 09:52 PM


Originally Posted by emmi (Post 206071)
im also interested in this for my nb, are they just pnp? or would i have to do some wiring/harness work?

hey scott, aren't you glad you went through the trouble of the DIY Turbo FAQ?

Braineack 01-29-2008 09:46 AM


Originally Posted by paul (Post 206093)
hey scott, aren't you glad you went through the trouble of the DIY Turbo FAQ?


nope. This site with have a very comprehensive easy to find/navigate FAQ shortly.


All times are GMT -4. The time now is 12:56 PM.


© 2024 MH Sub I, LLC dba Internet Brands